Zenoah G5300 manual Tree felling technique, Safe distance, Felling direction

Page 24

WORKING TECHNIQUES

Start by cutting from above (about 1/3 of the way through).

Finish by cutting from below so that the two cuts meet.

Tree felling technique

IMPORTANT! It takes a lot of experience to fell a tree. Inexperienced users of chain saws should not fell trees. Do not attempt any task that you feel unsure of!

Safe distance

The safe distance between a tree that is to be felled and anyone else working nearby is at least 2 1/2 tree lengths. Make sure that no-one else is in this ”risk zone” before or during felling.

Felling direction

The aim is to fell the tree in a position where you can limb and cross-cut the log as easily as possible.You want it to fall in a location where you can stand and move about safely.

Once you have decided which way you want the tree to fall you must judge which way the tree would fall naturally.

Several factors affect this:

•Lean of the tree

•Bend

•Wind direction

•Arrangement of branches

•Weight of snow

•Obstacles within the reach of the tree: for example, other trees, power lines, roads and buildings.

•Look for signs of damage and rot in the stem, this makes it more probably that the tree will break and start to fall before you expect it to.

You may find you are forced to let the tree fall in its natural direction because it is impossible or dangerous to try to make it fall in the direction you first intended.

Another very important factor, which does not affect the felling direction but does affect your safety, is to make sure the tree has no damaged or dead branches that might break off and hit you during felling.

The main point to avoid is letting the tree fall onto another tree. It is very dangerous to remove a trapped tree and there is high accident risk. See instructions under the heading Freeing a tree that has fallen badly.

IMPORTANT! During critical felling operations, hearing protectors should be lifted immediately when sawing is completed so that sounds and warning signals can be heard.

Clearing the trunk and preparing your retreat

Delimb the stem up to shoulder height. It is safer to work from the top down and to have the tree between you and the saw.

24 – English

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operator’s manual KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents What is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Throttle lockout Chain catcherRight hand guard Vibration damping systemStop switch Cutting equipmentMuffler General rulesCutting equipment designed to reduce kickback BarChain Injuries Some terms that describe the bar and chainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Lubricating cutting equipment Which could lead to serious, even fatal injuries Chain oilFilling with chain oil Checking chain lubricationChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Assembly Fitting the bar and chainFitting a spike bumper Protect your hands from injuryFuel Handling FuelFuel safety FuellingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique TermsLimbing Tree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cutFreeing a tree that has fallen badly Freeing a trapped treeHow to avoid kickback What is kickback?General advice Cutting trees and branches that are in tensionCutting the trunk into logs Maintenance Carburettor adjustmentGeneral Correctly adjusted carburettor High speed jet HChecking brake band wear Checking the front hand guardChecking the inertia brake release ImmediatelyMuffler Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil springAir filter Spark plugLubricating the bar tip sprocket Needle bearing lubricationAdjustment of the oil pump Dust Free centrifugal cleaningTemperature 0C or colder Cooling systemMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gauges EC-declaration of conformityApplies to Europe only EN ISO 12100-22003, Cispr 122005, EN ISOLimited Warranty Limited warranty1151331-26

G5300 specifications

The Zenoah G5300 is a highly regarded two-stroke gasoline engine, well-known for its robust performance and reliability within the realm of outdoor power equipment. Its engineering reflects a commitment to innovation and efficiency, making it ideal for various applications such as brush cutters, chainsaws, and other handheld equipment.

One of the key features of the G5300 is its displacement, which typically measures around 53cc. This size strikes an excellent balance between power output and weight, enabling users to tackle demanding tasks without the burden of a heavy machine. The engine's design leverages a high power-to-weight ratio, resulting in enhanced maneuverability and ease of use, particularly in tight spaces.

The G5300 utilizes a sophisticated electronic ignition system. This technology ensures reliable starting, consistent performance, and reduced emissions. The engine also features a dual-ring piston, which improves compression efficiency and enhances overall power delivery. This design contributes to a smoother operation and helps extend the life of the engine.

Another notable characteristic of the Zenoah G5300 is its fuel efficiency. With advancements in combustion technology, the engine is designed to reduce fuel consumption while still providing ample power. This not only lowers operational costs for the user but also minimizes environmental impact, aligning with contemporary preferences for sustainable practices in outdoor equipment.

Durability is another hallmark of the G5300. Built with high-quality materials, the engine is designed to withstand the rigors of outdoor use. The components are rigorously tested to ensure they can handle extreme conditions, whether it's scorching heat or chilly weather. The engine's construction also includes vibration dampening features, enhancing user comfort during extended operations.

Serviceability is a consideration in the design of the G5300, with easily accessible components promoting straightforward maintenance. Users can quickly perform routine checks, tune-ups, and repairs, minimizing downtime and extending the lifespan of the equipment.

In summary, the Zenoah G5300 stands out in the outdoor power equipment market due to its powerful and efficient design. With a focus on durability, serviceability, and fuel efficiency, it meets the demands of both professional landscapers and hobbyist gardeners alike. Its blend of advanced technology and practical features makes it a reliable choice for anyone seeking a high-performance engine for their outdoor tasks.
Top Page Image Contents