Zenoah HT2300A, CHT2300L manual Storage, Procedures to be Performed After Every 100 Hours of USE

Page 16

Maintenance

■PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

Storage

•Old fuel left in the carburetor can cause starting failure. Before storing the unit, empty the fuel tank and drain the carburetor with the priming pump equipped on it.

14 

Image 16

Contents Owner / Operator Manual Safety First Contents Safety Precautions  2 Work Gear and Clothing Avoid Noise Problem Things to Check Before Using Your HEDGE-TRIMMERThings to Check Before Starting UP the Engine Things to be Careful about When Using Your HEDGE-TRIMMER  6  Set up HT2300A/HT2300L 8  HOW to MIX Fuel FuelRecommended Mixing Ratio Gasoline 32OIL Fueling the UnitStarting Engine Warning OperationStopping Engine Adjusting Idling Speed HOW to USEMaintenance Spark Arrester MufflerIntake AIR Cooling Vent Warning Procedures to be Performed After Every 100 Hours of USE StorageSpecifications HT2300A HT2300L 16  Parts List  18   19   20   21   22   23   24   25  Manufacturers Warranty Coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans Emission Control Label Engine Family 1KZXS CD EMKomatsu Zenoah America INC