DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition Internal control production
MANUFACTURER : ZENOAH CO.,LTD
No. 9,
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model | : G2500 | |
Serial no. | : | 110001 and up |
Make | : | ZENOAH |
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE” CERTIFICATE, NO. M. 0303. 02. 2737
BY THE ISTITUTO CERTIFICAZIONE EUROPEA PALAZZO DEL VESCOVO - V. GARIBALDI, 20 40011 ANZOLA DELL’ EMILIA - ITALY
Signed in Saitama, Japan | 1st April 2007 |
Masahiko GOUDA
General Manager, Quality Assurance Department
G2500 / G2500 OPS
| G |
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE | B |
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition Internal control production
MANUFACTURER : ZENOAH CO.,LTD
No. 9,
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model | : G2500 OPS | |
Serial no. | : | 510001 and up |
Make | : | ZENOAH |
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE” CERTIFICATE, NO. U3 2592658 01 BY TÜV Rheinland Group - TÜV Rheinland InterCert kft. Product Certification -
Signed in Saitama, Japan | 1st April 2007 |
Masahiko GOUDA
General Manager, Quality Assurance Department
Contents |
| |
1. | For Safe Operation | 4 |
2. | Explanation of Symbols on the Machine | 8 |
3. | Installing Guide Bar and Saw Chain | 9 |
4. | Fuel and Chain Oil | 10 |
5. | Operating the Engine | 11 |
6. | Sawing | 13 |
7. | Maintenance | 15 |
8. | Maintenance of Saw Chain and Guide Bar | 16 |
9. | Troubleshooting Guide | 17 |
10. | Disposal | 17 |
11. | Specifications | 18 |
12. | Limited Warranty | 19 |