Zenoah Specifications, Power unit Cutting head G2500 / G2500 OPS Sprocket bar, Hard nose bar

G2500 / G2500 OPS

11. Specifications

Power unit:			Cutting head:
G2500 / G2500 OPS			<Sprocket bar>
Displacement (cm3):		25.4	Sprocket:		6T
Fuel:	Mixture (Gasoline 50 : Two-cycle oil 1)		Chain speed at max. power		......................... 17.1 (m/s)
	(when using ZENOAH genuine oil)		Guide bar
Fuel tank capacity (cm3):		230	Type:		Sprocket nose
Chain oil:		Motor oil SAE# 10W-30	Size (in. (cm)):		10 (25)
Oil tank capacity (cm3):		160	Saw chain
Carburetor:		Diaphragm type	Type:		Oregon 91VG
lgnition system::	..........................................	Solid State	Pitch (in. (mm)):		3/8 (9.53)
Spark plug:		Champion RCJ-7Y	Gauge (in. (mm)):		0.05 (1.27)
Oil feeding system:		Mechanical pump	<Hard nose bar>
Max. speed		12,500 (min-1)	Sprocket:		8T
Idle speed		2,900 (min-1)	Chain speed at max. power		......................... 15.2 (m/s)
G2500			Guide bar
			Type:	ZENOAH carving (Hard nose)
Dimensions (L x W x H) (mm):		265 x 220 x 220	Size (in. (cm)):		10 (25)
Dry weight			Saw chain
Power unit only (kg):		2.9	Type:		Oregon 25AP
Power:		0.96/9,000 (kw/min-1)	Pitch (in. (mm)):		1/4 (6.35)
G2500 OPS (One-push-start)			Gauge (in. (mm)):		0.05 (1.27)
			G2500 series are equipped with Chain Brake.
Dimensions (L x W x H) (mm):		265 x 235 x 220
Dry weight			Specifications are subject to change wihout notice.
Power unit only (kg):		3.1
Power:		0.88/9,000 (kw/min-1)

GB-18