Zenoah CHTZ2400 manual  12 , Recommended Mixing Ratio Gasoline 50OIL, HOW to MIX Fuel

Page 12

6. Fuel

WARNING

Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m (10ft) away from the fueling point before starting the engine.

The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use. (JASO FC GRADE OIL or ISO EGC GRADE)

Do not use BIA or TCW (2-stroke water- cooling type) mixed oil.

12

RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1

50:1 MIXING CHART

GASOLINE gal. 1 2 3 4 5

2-CYCLE OIL fl.oz 2.6 5.2 7.8 10.4 13

GASOLINE liter 1

2

3

4

5

2-CYCLE OIL ml 20 40 60 80 100

Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.

These engines are certified to operate on unleaded gasoline.

Make sure to use gasoline with a minimum octane number of 89 RON (USA/Canada: 87AL)

If you use a gasoline of a lower octane value than prescribed, there is a danger that the engine temperature may rise and an engine problem such as piston seizing may consequently occur.

Unleaded gasoline is recommended to reduce the contamination of the air for the sake of your health and the environment.

Poor quality gasolines or oils may damage sealing rings, fuel lines or fuel tank of the engine.

HOW TO MIX FUEL

IMPORTANT

Pay attention to agitation.

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well.

4.Pour In the rest of gasoline and agitate

Image 12
Contents HTZ2400 CHTZ2400 Safety First ContentsParts location  3 Specifications HTZ2400 / HTZ2400L 4  Symbols on the machine Engine Family 5KZXS JK EMType DE Moteur 5KZXS JK EM  5 For safe operation Working ConditionWorking Circumstance  6 Working Plan  7 Before Starting the Engine Starting the Engine 8  Using the Product  9 Maintenance If Someone Comes 10  Handling Fuel Transportation 11  HOW to MIX Fuel Fuel 12  Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, AvoidOperation OP1OP4 Starting EngineAdjusting Idling Speed OP6Stopping Engine OP3 Running in the EngineHOW to USE OP7 OP8 16  OP9 Hedge Trimming Techniques 17  Maintenance Maintenance Chart 18   19  MA4 Muffler Intake AIR Cooling Vent 20   21  Troubleshooting guide StorageCheck Probable Causes Action  22 Parts list  23 Cutting Unit HTZ2400 S/N HTZ2400-L S/N  24  25  Blade AssyCutting Unit CHTZ2400 S/N CHTZ2400-L S/N  26 CHTZ2400-L  27 Engine Unit HTZ2400/CHTZ2400 HTZ2400-L/CHTZ2400-L S/N  28  29  InsulatorLimited Warranty RedMax Garantie limitée Komatsu Zenoah America INC