Zenoah CHTZ2400 manual OP7 OP8, HOW to USE,  16 

Page 16

7. Operation

OP7

OP8

WARNING

•Weather conditions and altitude may effect carburation.

•Do not allow anyone to stay close to the hedge-trimmer while working or while adjusting the carburetor.

■HOW TO USE

HANDLE (CHTZ2400 only)

To reduce fatigue when trimming hadges, the handle can be swivelled through 90° to the left or right. (OP7, OP8).

Do not press the throttle during this operation!

Proceed as follows:

1.Free the handle by pressing the locking lever; (OP7)

2.Turn the handle until the locking lever clicks into place;

3.When the handle is locked in its new position, you can apply the throttle again.

(1)handle

(2)locking lever

You can swivel the handle even with the engine idling because the hedge-trimmer is equipped with a blade brake that maintains the blades at a standstill.

16 

Image 16

Contents HTZ2400 CHTZ2400 Safety First ContentsParts location  3 HTZ2400 / HTZ2400L Specifications 4  Symbols on the machine Engine Family 5KZXS JK EMType DE Moteur 5KZXS JK EM  5 For safe operation Working ConditionWorking Circumstance  6 Working Plan  7 Starting the Engine Before Starting the Engine 8  Using the Product  9 If Someone Comes Maintenance 10  Transportation Handling Fuel 11  HOW to MIX Fuel Fuel 12  Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, AvoidOperation OP1OP4 Starting EngineAdjusting Idling Speed OP6Stopping Engine OP3 Running in the EngineOP7 OP8 HOW to USE 16  Hedge Trimming Techniques OP9 17  Maintenance Chart Maintenance 18   19  Intake AIR Cooling Vent MA4 Muffler 20   21  Troubleshooting guide StorageCheck Probable Causes Action  22 Parts list  23 Cutting Unit HTZ2400 S/N HTZ2400-L S/N  24  25  Blade AssyCutting Unit CHTZ2400 S/N CHTZ2400-L S/N  26 CHTZ2400-L  27 Engine Unit HTZ2400/CHTZ2400 HTZ2400-L/CHTZ2400-L S/N  28  29  InsulatorLimited Warranty RedMax Garantie limitée Komatsu Zenoah America INC