Zenoah CHTZ2400 manual MA4 Muffler, Intake AIR Cooling Vent,  20 

Page 20

8. Maintenance

MA4

MUFFLER

WARNING

Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately.

Note that failing to do so may result in the engine catching on fire.

INTAKE AIR COOLING VENT

WARNING

Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

Clean the cylinder fins with compressed air or a brush. (MA4)

IMPORTANT

If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the hedge-trimmer.

20

Image 20
Contents HTZ2400 CHTZ2400 Safety First ContentsParts location  3  4  SpecificationsHTZ2400 / HTZ2400L Symbols on the machine Engine Family 5KZXS JK EMType DE Moteur 5KZXS JK EM  5 For safe operation Working ConditionWorking Circumstance  6 Working Plan  7  8  Before Starting the EngineStarting the Engine Using the Product  9  10  MaintenanceIf Someone Comes  11  Handling FuelTransportation HOW to MIX Fuel Fuel 12  Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, AvoidOperation OP1OP4 Starting EngineAdjusting Idling Speed OP6Stopping Engine OP3 Running in the Engine 16  HOW to USEOP7 OP8  17  OP9Hedge Trimming Techniques  18  MaintenanceMaintenance Chart  19   20  MA4 MufflerIntake AIR Cooling Vent  21  Troubleshooting guide StorageCheck Probable Causes Action  22 Parts list  23 Cutting Unit HTZ2400 S/N HTZ2400-L S/N  24  25  Blade AssyCutting Unit CHTZ2400 S/N CHTZ2400-L S/N  26 CHTZ2400-L  27 Engine Unit HTZ2400/CHTZ2400 HTZ2400-L/CHTZ2400-L S/N  28  29  InsulatorLimited Warranty RedMax Garantie limitée Komatsu Zenoah America INC