Zenoah G500AVS owner manual Explanation of Symbols on the Machine, Port to refuel MIX Gasoline

Page 6

G455AVS / G500AVS

2. Explanation of Symbols on the Machine

WARNING

For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make any mistake.

The port to refuel “MIX GASOLINE”

Position: Fuel cap

The port to top up chain oil

Position: Oil cap

Setting the switch to the “ ” position, the engine starts.

Setting the switch to the “O” position, the engine stops immediately.

Position: Rear-left of the unit

(d)Choke will close when pulling the choke knob. Position: Choke knob

The screw under the “H” stamp is The High-speed adjustment screw.

The screw under the “L” stamp is The Slow-speed adjustment screw.

The screw at the left of the “T” stamp is the Idle adjustment screw.

Position: Left side of the rear handle

Shows the directions that the chain brake is released (white arrow) and activated (black ar- row).

Position: Front of the chain cover

GB-6

Image 6
Contents G455AVS / G500AVS GB-145.0 cm3 102.5 dBA 110 dBA Wear head, eye and ear protectionLpA LwA 49.3 cm3 103.6 dBA 110 dBAContents Always shut off the engine be- fore setting it down For safe operationKickback Safety Precau Tions for Chain SAW Users Kickback may occur when the nose or tip of the guide barGB-5 Position Fuel cap Explanation of Symbols on the MachinePort to refuel MIX Gasoline Port to top up chain oilInstalling Guide Bar and Saw Chain Standard saw unit package contains the items as illustratedPay attention to the correct direction of the saw chain Fuel and Chain Oil Starting the Engine Adjusting the CarburetorOperating the Engine Checking the OIL SupplyChain Brake How to confirmHOW to Switch Between Operating Modes Stopping the EngineGuard Against Kickback SawingBefore proceeding to your job Felling a TreeMaintenance Maintenance After Each USEPeriodical Service Points Maintenance of Saw Chain and Guide Bar Disposal Troubleshooting GuideCase 2. Lack of power/Poor acceleration/ Rough idling Reverse the bar occasionally to prevent partial wearPower unit SpecificationsLimited warranty Cutting head

G500AVS specifications

The Zenoah G500AVS is a standout product in the world of high-performance engines, specifically designed for a wide range of applications, including remote-controlled vehicles, industrial tools, and gardening equipment. This engine combines power, efficiency, and advanced technology to meet the demands of both hobbyists and professionals.

One of the primary features of the G500AVS is its powerful 50cc displacement, which enables it to deliver an impressive output of torque and horsepower. This capability makes it suitable for applications requiring substantial lifting and cutting strength, such as lawn mowers and chainsaws. The engine is equipped with a lightweight construction, allowing for easier handling without compromising on performance.

The G500AVS utilizes a unique anti-vibration system (AVS) that significantly reduces vibrations during operation. This system not only enhances user comfort but also contributes to the longevity of the engine by minimizing wear and tear on crucial components. The incorporation of AVS technology is a key selling point, particularly for users who spend extended periods operating equipment powered by this engine.

In terms of fuel efficiency, Zenoah has engineered the G500AVS with a fuel-efficient design that minimizes consumption while maximizing output. This is essential for users looking to reduce operational costs without sacrificing performance. Additionally, the engine features an easy-start system, making it user-friendly and accessible for operators of all skill levels.

The G500AVS also incorporates advanced ignition technology, which provides reliable starting and consistent performance in various environmental conditions. This feature is essential for ensuring that the engine performs optimally, regardless of temperature or humidity levels.

Another notable characteristic of the Zenoah G500AVS is its robust build quality. The engine is designed to withstand the rigors of demanding applications, offering durability that is crucial for professionals who rely on their equipment to complete jobs effectively and efficiently.

In summary, the Zenoah G500AVS engine is a top-tier option for anyone in need of a reliable, powerful, and efficient engine. Its combination of advanced features, including an anti-vibration system, fuel efficiency, easy starting, and durable construction, make it an appealing choice for both hobbyists and professionals alike. Whether for recreational use or serious industrial applications, the G500AVS stands out as a model of engineering excellence in the engine market.