Poulan 190388 owner manual Table of Contents

Page 3

PRODUCT SPECIFICATIONS

Gasoline Capacity:

3 Quarts (2.8L)

 

Unleaded Regular

 

 

Oil (API-SF-SJ):

SAE 30 (Above 32°F/0°C)

(Capacity: 20 oz./0.6L)

SAE 5w-30 (Below 32°F/0°C)

Spark Plug :

Champion

(Gap: .030"/0.76mm)

RC12YC

CONGRATULATIONS on your purchase of a new tiller. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tiller properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your tiller.

•Follow instructions under “Maintenance” and “Storage” sections of this Owner’s Manual.

WARNING:This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass covered land un- less the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See your Sears Authorized Service Center/Department for spark arrester. Refer to the Repair Parts section of this manual for part number.

TABLE OF CONTENTS

SAFETY RULES

2

CUSTOMER RESPONSIBILITIES

3

PRODUCT SPECIFICATIONS

3

ASSEMBLY

4-6

OPERATION

7-11

MAINTENANCE SCHEDULE

12

MAINTENANCE

12-14

SERVICE & ADJUSTMENTS

15-18

STORAGE

19

TROUBLESHOOTING

20

REPAIR PARTS-TILLER

21-27

WARRANTY

28

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model NO. HDR500M Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateMeets Ansi Safety Requirements OperationKnow Your Tiller Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive FORWARD- Wheels ONLY/TINES StoppedADD Gasoline Before Starting EngineTurning To TransportTilling Hints To Start Engine See FigTine Shear Pins Adjust Wheels for Cultivating See FigsCultivating Maintenance Maintenance ScheduleGeneral Recommendations AIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTo Adjust Handle Height See Fig TillerTine Replacement See Figs , 25 Ground Drive Belt Adjustment See Fig To Remove Belt Guard See FigTo Replace Ground Drive Belt See Figs To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Limited Warranty

190388 specifications

The Poulan 190388 is a powerful and versatile tool designed to meet the demands of homeowners and landscaping professionals alike. Renowned for its dependability and performance, this lawn care equipment stands out in the market for several compelling reasons.

One of the main features of the Poulan 190388 is its robust 42cc engine. This two-cycle engine delivers ample power to tackle a variety of yard tasks ranging from trimming lawns to enhancing garden aesthetics. Its design prioritizes efficiency, ensuring that users can complete their tasks without frequent interruptions for refueling.

The Poulan 190388 is equipped with a specially designed cutting system that ensures precision and efficiency. Its 18-inch cutting blade guarantees optimal coverage and reduces the time needed for mowing or trimming. The sharp edge of the blade allows for a clean cut, promoting healthier grass growth and enhancing the overall appearance of the lawn.

A significant advantage of this tool is its lightweight design. Weighing approximately 10 pounds, the Poulan 190388 is easy to maneuver, making it an ideal choice for users of all experience levels. Its ergonomic handle offers a comfortable grip, allowing prolonged use without causing fatigue, thereby increasing productivity during long work sessions.

The Poulan 190388 incorporates advanced technologies, including an easy-start mechanism that reduces the resistance typically associated with starting two-cycle engines. This feature ensures that the equipment can be fired up easily, even for users who may not have extensive experience with lawn care tools.

Durability is another hallmark of the Poulan 190388. Constructed from high-quality materials, this lawn care equipment is designed to withstand the wear and tear of regular use. Its robust build not only enhances its lifespan but also decreases the likelihood of maintenance issues, allowing users to focus more on their lawn care tasks rather than repairs.

Additional features of the Poulan 190388 include adjustable cutting heights, allowing users to tailor the height of their cut according to their specific needs. This flexibility makes it suitable for various grass types and terrains, ensuring that it meets diverse landscaping demands.

In summary, the Poulan 190388 stands out for its powerful engine, lightweight design, innovative technologies, and robust durability. Whether for maintaining a manicured lawn or tackling rough terrain, it proves to be an essential tool for achieving a beautiful landscape. With its combination of efficiency and user-friendly features, the Poulan 190388 is a smart investment for anyone looking to elevate their lawn care game.
Top Page Image Contents