Troy-Bilt E666M-Pony manual Decals, To Avoid Serious Injury

Page 5

 

Section 1: Safety

5

 

 

 

 

 

 

4. To reduce the chances of a fire

hazard, keep the engine free of grass,

leaves, or excessive grease.

5. Store gasoline in a cool, well-venti-

lated area, safely away from any spark-

or flame-producing equipment. Store

gasoline in an approved container,

safely away from the reach of children.

6. Refer to the Maintenance section of

this Manual and in the separate Engine

DECALS

For your safety and the safety of others, various safety message decals are on your unit (see Figure below). Keep the decals clean and legible at all times. Contact your local service dealer or the factory for

replacements if any decals are damaged or missing.

Refer to the Parts List pages for decal locations and part numbers.

Owner’s Manual for instructions if the

tiller is to be stored for an extended

period.

7. Never perform maintenance while

the engine is running or the spark plug

wire is connected, except when specifi-

cally instructed to do so.

8. If the fuel tank has to be drained, do

this outdoors.

Operating Symbols

Various symbols (shown here, with word descriptions) may be used on the tiller and engine.

STOP

FAST SLOW STOP

STOP

CHOKE

STOP START ON

Control Descriptions

Tine Warning (on right

side of hood flap)

Starting Stabilization (on top of engine or fuel tank)

Operating Instructions and

Warning Messages

Hot Surfaces/Moving Belts

(on top of belt cover)

Figure 1: Location of Safety and Operating Decals

CHOKE ROTATING

OFF TINES

R

REVERSE

WARNING

TO AVOID SERIOUS INJURY:

LEVER DIRECTION

TILLER DIRECTION

ENGAGED DISENGAGED

READ THE OWNER’S MANUAL.

KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.

KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.

NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.

SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG- GING TINES OR MAKING REPAIRS.

KEEP BYSTANDERS AWAY FROM MACHINE.

KEEP AWAY FROM ROTATING PARTS.

USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.

Image 5
Contents Operator’s Manual Customer Support Table of ContentsFinding Model Number Training Safety Alert SymbolPreparation OperationUse slower engine speeds Maintenance and StorageKeep children and pets away To Avoid Serious Injury DecalsIntroduction Hardware BAG Parts ListInspect Unit Attach HandlebarsAssistance Attach Reverse Clutch Control CableAttach Forward Clutch Control Cable Check AIR Pressure in Tires Attach Wheel Gear LeverMarked Neg Positive terminal to help protect it from corrosionTo Operate the Forward Clutch Control Wheel Gear LeverForward Clutch Control Reverse Clutch Control Engine ControlsDepth Regulator Engine Throttle Control LeverBREAK-IN Operation PRE-START ChecklistStarting and Stopping Engine Starting the Engine Operating the TillerStopping the Engine Release all controls on the tillerStopping the Tiller and Engine For reverse motion of the wheels and tinesChoosing correct wheel and tine speeds Tilling Tips & TechniquesTerrace Gardening Tilling across slopes without using terracesTilling up and down slopes Loading and Unloading the Tiller Power CompostingCheck Tire Pressure Maintenance ScheduleCheck Hardware Using a clean funnel, slowly add SAE Transmission Gear OIL ServiceCheck for OIL Leaks To Check Transmission Gear Oil LevelEngine OIL Service Engine CleaningAIR Cleaner Service Spark Plug ServiceBolo Tines Wheel Gear Cable AdjustmentOFF Season Storage Cutting Edge Tine Checking and Adjusting Forward Clutch Belt TensionChecking Forward Belt Tension Checking and Adjusting Reverse Clutch Belt TensionRemoving Forward Clutch Belt Installing Forward Clutch BeltRemoving Reverse Clutch Belt Reverse Clutch Belt Removal and ReplacementInstalling Reverse Clutch Belt Battery Maintenance Problem Possible Cause Correction TroubleshootingROW MARKER- Model OEM-290-257 Bumper Model OEM-290-254HILLER/FURROWER Model OEM-290-251 Parts List QTY Part DescriptionENGINE, Support BRACKETS, PULLEYS, BELTS, Belt Cover 710-0539 721-04044 Transmission HOUSING, COVERS, SEALS, GASKETS, PlugsMain Drive Shaft Drive SHAFT, Input Pinion Shaft and Gear AssembliesWheel SHAFT, Eccentric Shaft and Tiller Shaft Assemblies Description QTY Bolo TINES, WheelsBumper OEM-290-254 Bumper AttachmentOEM-290-254 HOOD, Bracket and Depth Regulator Model E666M Cable ground wire to starter Motor bracket Electric Start AssemblyTROY-BILT Tiller Lifetime Limited Warranty
Related manuals
Manual 28 pages 36.62 Kb