Troy-Bilt E666M-Pony manual Bolo TINES, Wheels, Description QTY

Parts List 35

Models 664D & E666M

BOLO TINES, WHEELS

NOTE 1: Custom Tilling Tines are available for your tiller. These are special hard-faced tines that are thicker than standard tines.

IMPORTANT: Left and right sides of tiller are determined by standing in operator position and facing direc- tion of forward travel.

REF.	PART
No.	No.	DESCRIPTION	QTY.
1	710-0514	Hex Hd. Screw, 3/8-16 x 1*	16
2	GW-1270-2	Bolo Tine-single. Right hand tine
		used on left side of tiller	8
3	712-3000	Hex Locknut, 3/8-16	18
5	710-3096	Hex Hd. Screw, 3/8-16 x 2, Grade 8....	2
7	GW-1270-1	Bolo Tine-single. Left hand tine
		used on right side of tiller	8
8	1902154	Tine Holder. For left and right sides ....	2

--1901118 Bolo Tine Replacement Set (Incl. eight

ea. right hand and left hand tines,
and sixteen ea. Refs. 1 and 3)	1

REF.	PART
No.	No.	DESCRIPTION	QTY.

--GW-2475-1 Custom Tilling Bolo Tine, Left hand

tine (see Note 1 above) 8

--GW-2475-2 Custom Tilling Bolo Tine, Right hand

tine (see Note 1 above) 8

--GW-10802 Custom Tilling Bolo Tine Replacement

		Set (Incl. eight ea. right hand and
		left hand custom tines, and sixteen
		each of Refs. 1 and 3)	1
9	GW-9338	Hitch Pin	2
10	1917487	Wheel and Tire Assembly	2
11	GW-9380	Clevis Pin, .312 x 1-3/4	2

* Specify GRADE 5 if ordering part locally.