SECTION CHECKLIST
Wheel Lockouts
Handlebar Adjustments (Tilt & Swivel)
Drag Stake
Belt Tension Adjustment
WHEEL LOCKOUTS (616RT)
Place wheels in tilling position.
1.Pull knob in center of wheel out, away from machine.
2.Rotate knob and lockout to align with slot on axle, release knob. Rotate wheel to align slot in wheel hub with lockout.
3.Wheel and axle should be firmly locked together before tilling.
4.Repeat for other wheel.
Model 616RT (6-hp)
Wheel lockout in tilling position.
(hub & axle slot)
NOTE: Always have both wheel lockouts in or out. Do not operate tiller with only one wheel locked.
To place wheels in free-wheel position.
1.Pull knob in center of wheel out, away from machine .
2.Rotate knob and lockout to align lockout with detent in end of axle. Release knob.
3.Wheel should turn freely on axle.
Adjustments
WHEEL LOCKOUTS (514RT)
Place wheels in tilling position.
1.Remove lockpin. Align hole in axle with hole in wheel hub.
2.Insert lockpin through holes, fold lockpin ring to secure pin to axle.
3.Wheel and axle should be firmly locked together before tilling.
4.Repeat for other wheel.
Model 514RT (5-hp)
Wheel lockpin in
(axle hole only)
NOTE: Always have both wheel lockouts in or out. Do not operate tiller with only one wheel locked.
To place wheels in
1.Remove lockpin. Slide wheel inward toward machine.
2.Insert pin in axle only.
3.Wheel should turn freely on axle.
CAUTION
Never start engine or operate tiller with wheels in free- wheel position. The
Page 9