Operation
TILLING
1.Adjust the depth regulator lever to desired tilling depth.
NOTE: Raise depth regulator lever up one hole at a time, testing tiller operation after each raise. Raising depth regulator lever too high can result in loss of control of tiller!
2.Move the throttle control to fast.
3.Place the tiller in forward by pushing down on the drive safety control
NOTE: You can slow the tiller's forward advance at any time by putting slight downward pressure on the handlebars, or you can stop the tiller by releasing the drive safety control levers to the neutral position.
CAUTION
To stop wheels and tines at any time, release drive safety control levers to neutral position.
CAUTION
Always release drive safety control levers to neutral position before adjusting the depth regulator lever.
Practice operating the controls and tiller with tines out of ground before beginning to till. It is important that you know how to use the tiller properly, how to keep control at all times, how to stop the tines and wheels from turning, and how to stop the engine if necessary. If you do not know how to do these things, read the Controls, Adjustments and Safety sections before proceeding.
Page 14