Simplicity 1693847 manual Check or Fill Engine Crankcase

Maintenance and Storage

CHECK OR FILL ENGINE

CRANKCASE

1.Add oil according to chart below. Do not overfill. Use a high quality detergent oil classified "For Service SF-SJ,". Use no special additives with recommended oils. Do not mix oil with gasoline.

2.Always check oil level before starting engine. Refer to engine manual for complete instructions.

Engine is shipped from factory without oil. You must add engine oil before starting engine.

Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99.

*Air cooled engines run hotter than automotive engines. Use of non-synthetic multi-viscosity oils (5W30, 10W-30, etc.) above 40ο F (4ο C) will result in high oil consumption and possible engine damage. Check oil level more frequently if using these types of oils.

**SAE 30 oil, if used below 40ο F (4ο C), will result in hard starting and possible engine bore damage due to inadequate lubrication.

Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99.

Page 18