Troy-Bilt 630C-Tuffy manual Tilling Tips & Techniques CON’T, Power Composting, Tilling On Slopes

Page 15

TILLING TIPS & TECHNIQUES (CON’T)

Power Composting

Power composting simply means tilling under and burying in the soil all manner of organic matter such as crop residues, leaves, grass clippings and cover crops. This material will de- compose during the non-growing season and add important natural nutrients to the soil.

The first place to begin is with crop residues such as leftover vines, stalks, stems and roots. Power compost these crop residues as soon as they finish bearing. The sooner this is done, the better, as tender green matter is easier to till under. Use the deepest depth regulator set- ting possible without causing the engine to labor or the tiller to jump ahead.

Standing cornstalks of reasonable height can be power composted. Pushing over (but not uprooting) cornstalks will often make it easier to chop up the stalks. Keep the tines clear of excessive tangling by “fishtailing” or frequently using reverse. Make several passes, then re- turn a few days later to finish off any remaining stubble.

After tilling under crop residues, add more organic matter such as leaves, grass clippings and even kitchen scraps. When tilled into the soil, this organic matter will decompose and add even more important nutrients to the soil.

WARNING: When power composting, do not keep the Depth Regulator Lever at a deep setting if the tiller jumps or bucks.

If jumping or bucking occurs, move the Depth Regulator Lever down to a shallow setting and then slowly increase the tilling depth on later passes.

Failure to follow this warning could result in personal injury.

After power composting, you may want to plant a “green manure” cover crop to protect the soil during the off-season. You simply grow a crop of clover, alfalfa, buckwheat, peas, beans, rye grass, grain, or kale and then till it into the soil prior to the planting season.

Tilling On Slopes

Read the following recommendations before tilling on slopes:

If you must garden on a moderate slope, please follow two very important guidelines:

1.Till only on moderate slopes, never on steep ground where footing is difficult (review safe- ty rules in Section 1: Safety of this manual).

2.We recommend tilling up and down slopes rather than terracing. Tilling vertically on a slope allows maximum planting area and also leaves room for cultivating.

IMPORTANT: When tilling on slopes, be sure the correct oil level is maintained in the engine (check every one-half hour of operation). The incline of the slope will cause the oil to slant away from its normal level and this can starve engine parts of required lubrication. Keep the motor oil level at the full point at all times!

Tilling Up and Down Slopes (Vertical Tilling)

WARNING: Do not

operate tiller on a slope too steep for safe operation. Till slowly and be sure you have good footing. Never permit tiller to freewheel down slopes. Failure to follow this warning could result in personal injury.

To keep soil erosion to a minimum, be sure to add enough organic matter to the soil so that it has good moisture-holding texture and try to avoid leaving footprints or wheel marks.

When tilling vertically, try to make the first pass uphill as the tiller digs more deeply going uphill than it does downhill. In soft soil or weeds, you may have to lift the handlebars slightly while going uphill. When going downhill, overlap the first pass by about one-half the width of the tiller.

Tilling Across Slopes Without Using Terraces (Horizontal Tilling)

If vertical or terracing gardening aren’t practical for you, then you can till laterally across a slope. We don’t recommend this method as it can create unsure footing and invites soil erosion.

As in terrace gardening, start at the top of the slope and overlap the first pass by half the width of the tiller. For added stability of the tiller, always keep the uphill wheel in the soft, newly tilled soil.

Terrace Gardening

When a slope is too steep or too short for vertical tilling, it may be necessary to till across the slope and create terraced rows. Terraces are rows that are cut into the side of a slope, creating a narrow, but flat area on which to plant.

On a long slope, you can make several terraces, one below the other.

Terraces should be only 2-to-3 feet wide. Digging too far into the side of the slope will expose poor subsoil that is unproductive for plants.

15

Image 15
Contents 11/19/03 Form no -10594D.fmTable of Contents Finding Model NumberCustomer Support Safety Alert Symbol SafetyExercise caution to avoid slipping or fall- ing Keep children and pets awayUse slower engine speeds To Avoid Serious Injury Operating SymbolsInspect Unit AssemblyAssembly Steps IntroductionUse the handlebar to roll the tiller to a flat area Install Forward Clutch CableIf the spring length is incorrect, you While preventing the cable adjusterOutermost coil to the outermost coil From turningCheck all nuts and screws for tightness Check Transmission OIL LevelFreewheel Ature package to identify the controls on your engineStop all tiller motion by releasing the Forward Clutch Bail Travel Position Shallow SettingsTo adjust the handlebars To operate the Forward Clutch BailIntroduction BREAK-IN Operation Starting and StoppingChange engine oil To move the Model 630C in reverse for short distances Operating the TillerStopping the Engine and Tiller For forward motion of the wheels and tinesTilling Tips & Techniques Power Composting Tilling Tips & Techniques CON’TTilling On Slopes Loading and Unloading the Tiller Clearing the TinesCheck Tire Pressure Transmission Gear OIL ServiceTiller Lubrication Check HardwareTine Inspection Removing⁄Installing a Single TineRemoving⁄Installing a Tine Assembly Bolo TinesChecking and Adjusting Replacement Belt InformationTo Check Forward Belt Tension To Check Reverse Belt Tension Forward Clutch Bail AdjustmentEngine Cleaning AIR Cleaner Service Engine OIL Service Models 634F/634A onlyTo Change the Engine Oil Spark Plug ServiceSpark Arrester Screen Service OFF-SEASON StorageProblem Possible Cause Correction TroubleshootingDescription Models 630C, 634F & 634A Parts ListModels 630C, 634F & 634A 1916719 For Model 630C For Model 634F For Model 634A Front 619-04013 Hold Tines With Blunt End Toward You Tine Shaft37 a For Model 630C For Model 634F For Model 634A TROY-BILT Tiller Lifetime Limited Warranty

630C-Tuffy specifications

The Troy-Bilt 630C-Tuffy stands out as a reliable and robust garden tiller designed for homeowners and gardening enthusiasts looking to cultivate their gardens with ease. This tiller is particularly noted for its performance, durability, and user-friendly features, making it a favored choice among many.

One of the most prominent characteristics of the 630C-Tuffy is its powerful 208cc engine, which provides ample power for breaking up hard soil, turning compacted ground, and mixing in compost or fertilizers. This engine ensures that the tiller can handle a variety of tasks, from light tilling in a small garden to more demanding projects. The tiller features a 16-inch tilling width, allowing users to cover a significant area in a shorter amount of time while the adjustable tilling depth can be set from 1 to 7 inches to suit specific gardening needs.

A standout technology utilized in the Troy-Bilt 630C-Tuffy is its Counter-Rotating Tines (CRT). This innovation allows the tines to turn in the opposite direction of the wheels, creating a more effective and efficient tilling action. This design not only aids in breaking up the soil more thoroughly but also reduces the likelihood of the tiller becoming bogged down in tougher soil conditions.

The tiller is built with a sturdy steel frame and heavy-duty tines that ensure longevity and reliability even with repeated use. Its 6-position adjustable handle offers comfortable operation, enabling users to customize the height according to their preference, which helps reduce fatigue during long tilling sessions. Moreover, the Troy-Bilt 630C-Tuffy is equipped with a bump start feature, making it easy to start and operate.

For added convenience, this tiller features large, durable wheels that enhance maneuverability across various terrains, providing improved stability and traction. The 630C-Tuffy also boasts a folding handle for easier storage, allowing users to save space in their garages or sheds when not in use.

In summary, the Troy-Bilt 630C-Tuffy combines power, technology, and user-friendly features to deliver a top-tier gardening tool. With its ergonomic design, efficient tilling capabilities, and strong build, it is a valuable addition to any garden enthusiast's toolkit, ready to turn soil and nurture thriving gardens.