XLS Series Power Amplifiers
3 Operation
3.2 Front Panel Controls
and Indicators
A. Cooling Vents
B. Level Controls
Two black rotary level controls, one for each channel.
C. Clip Indicators
Two red LEDs, one for each channel, illu- minate when the channel’s output signal is being overdriven.
D. Power Indicator
Green LED indicates amplifier has been turned on and AC power is available.
E. Fault Indicator
Yellow LED illuminates when amplifier is in protect mode. Also illuminates briefly during normal
F. Power Switch
Amplifier is on when the switch is in the UP position.
Figure 4.1 Front Panel Controls and Indicators
page 12 | Operation Manual |