Crown Audio XLS Series operation manual Construction XLS

XLS Series Power Amplifiers

6 Specifications

Performance	XLS 202	XLS 402	XLS 602
Damping Factor (8 ohm): 10 Hz to 400 Hz	> 200	> 200	> 200
Crosstalk (below rated power,
at 1 kHz	–82 dB	–82 dB	–82 dB
at 20 kHz	–58 dB	–58 dB	–58 dB
DC Output Offset (Shorted input)	± 10 mV	± 10 mV	± 10 mV
Input Impedance (nominally balanced, nominally unbalanced)	20 kilohms, 10 kilohms	20 kilohms, 10 kilohms	20 kilohms, 10 kilohms
Load Impedance (Note: Safe with all types of loads)
Stereo	2-8 ohms	2-8 ohms	2-8 ohms
Bridge Mono	8 ohms	8 ohms	8 ohms
Voltage Gain (at maximum level setting)	31 dB	31 dB	31 dB
AC Line Voltage and Frequency Configurations Available (± 10%)	120 VAC/60 Hz and 230 VAC/50 Hz	120 VAC/60 Hz and 230 VAC/50 Hz	120 VAC/60 Hz and 230 VAC/50 Hzz

Construction	XLS 202	XLS 402	XLS 602
Ventilation	Flow-through ventilation from front to back	Flow-through ventilation from front to back	Flow-through ventilation from front to back
Cooling	Internal heat sinks with forced-air cooling	Internal heat sinks with forced-air cooling	Internal heat sinks with forced-air cooling
Air Volume Requirements (per minute per unit)	80.15 ft3 (2.27 m3)	80.15 ft3 (2.27 m3)	80.15 ft3 (2.27 m3)
Dimensions: Width, Height, Depth (behind mounting surface)	EIA Standard19"W (EIA RS-310-B)	EIA Standard19"W (EIA RS-310-B)	EIA Standard19"W (EIA RS-310-B)
	x 3.5” (8.9 cm) H x14" (35.6cm) D	x 3.5” (8.9 cm) H x14" (35.6cm) D	x 3.5” (8.9 cm) H x14" (35.6cm) D
Net Weight, Shipping Weight	21.0 lb (9.5 kg), 26.0 lb (11.8 kg)	25.3lb(11.5kg),30.3lb(13.8kg)	27.2lb(12.3kg),32.2lb(14.6kg)

Operation Manual page 17