Maxim MXR500 owner manual Tine Replacement See Figs , 25

Page 16

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 24, 25 and 26)

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

NEW TINE

WORN TINE

FIG. 24

•To maintain the superb tilling performance of this machine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches (9 cm), they should be replaced or straightened as necessary.

•New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above.

 

tine_3

TINE

TINE

3-1/2" MAX (9 CM)

 

FIG. 25

 

HAIRPIN CLIP

COUNTER

 

TINE

 

ROTATION

 

 

HAIRPIN CLIP

 

SHARP EDGE

SHARP EDGE

SHARP EDGE

 

SHARP EDGE

 

SHEAR PIN

SHARP

EDGES

SHEAR PIN

tine_13

 

SHARP EDGE

FIG. 26

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model NO. MXR500 HP 17 Inch Tiller Safety Rules Maintenance and StorageTraining PreparationTable of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Install Handle See Figs , 4, Unpacking Carton See FigAttach Clutch Cable See Fig Connect Shift ROD See FigRemove Tiller from Crate Check Tire PressureOperation Meets Ansi Safety RequirementsKnow Your Tiller HOW to USE Your Tiller Tine Operation with Wheel DriveForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedBefore Starting Engine TurningTo Transport ADD GasolineTo Start Engine See Fig Tine Shear PinsTilling Hints Adjust Wheels for Cultivating See Figs CultivatingMaintenance Lubrication ChartGeneral Recommendations Before Each USEEngine AIR Filter See FigCleaning MufflerSpark Plug Cooling System See FigService and Adjustments To Adjust Handle Height See FigTiller Tire CareTine Replacement See Figs , 25 To Remove Belt Guard See Fig Ground Drive Belt Adjustment See FigTo Replace Ground Drive Belt See Figs To Adjust Throttle Control Cable See Fig To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points Limited Warranty

MXR500 specifications

The Maxim MXR500 is a cutting-edge multi-channel audio mixer designed for professional sound engineers and musicians. Renowned for its robust construction and versatile features, the MXR500 is tailored for both studio recording and live performance settings. This mixer combines advanced technology with user-friendly controls, making it an ideal choice for a wide range of audio applications.

One of the standout features of the MXR500 is its exceptional sound quality. The mixer is equipped with high-performance preamps that ensure crystal-clear audio recording and playback. Each channel boasts a 3-band EQ, allowing users to finely tune the tonal characteristics of individual audio sources. This capability is particularly beneficial in live settings, where adjusting sound on the fly is crucial.

The MXR500 supports up to 16 input channels, facilitating the mixing of multiple audio signals simultaneously. Each channel offers independent gain control, allowing users to balance levels accurately. The mixer also features built-in digital effects, including reverb and delay, enhancing the audio experience without the need for additional equipment.

In terms of connectivity, the MXR500 comes with a range of input and output options, including XLR and TRS connectors. This versatility enables seamless integration with microphones, instruments, and other audio gear. Additionally, the mixer supports USB connectivity, making it easy to connect to computers for digital recording or live streaming.

The mixer’s interface is designed with ease of use in mind. Intuitive faders and knobs are clearly labeled, allowing sound engineers to make quick adjustments during performances. The bright LED meters provide visual feedback on audio levels, ensuring optimal mixing in various lighting conditions.

Durability is another hallmark of the Maxim MXR500. Constructed with high-quality materials, this mixer is built to withstand the rigors of both studio and on-the-road use. The compact design also makes it portable, ideal for musicians who need to transport their equipment frequently.

In conclusion, the Maxim MXR500 is a powerful and versatile audio mixer that meets the demands of professionals across different sectors. With its advanced features, exceptional sound quality, and durable construction, the MXR500 stands out as a reliable choice for any sound engineer or musician looking to elevate their audio production experience. Whether in the studio or on stage, the MXR500 delivers performance and quality that audio professionals can depend on.
Top Page Image Contents