Maxim MXR500 owner manual Adjust Wheels for Cultivating See Figs

Page 11

OPERATION

CULTIVATING

Cultivating is destroying the weeds between rows to pre- vent them from robbing nourishment and moisture from the plants. At the same time, breaking up the upper layer of soil crust will help retain moisture in the soil. Best digging depth is 1" to 3" (2.5-7.5 cm). Lower the outer side shields to protect small plants from being buried.

•Cultivate up and down the rows at a speed which will allow tines to uproot weeds and leave the ground in rough condition, promoting no further growth of weeds and grass (See Fig. 15).

FIG. 15

ADJUST WHEELS FOR CULTIVATING (See Figs. 16 and 17)

•Place blocks under right hand side of tiller and remove hairpin clip and clevis pin from right hand wheel.

•Move wheel outward approximately 1 inch (2.5 cm) until hole in inner wheel hub lines up with inner hole in axle.

•Replace clevis pin and hairpin clip on inside of wheel and remove blocks.

•Repeat preceding steps on left hand side.

NOTE: In extremely rough conditions and while cultivat- ing, the wheels should be moved outward on the axle for increased stability.

OUTER VIEW OF TIRE

CLEVIS

PIN

HAIRPIN

CLIP

tire_1

FIG. 16

INNER VIEW OF TIRE

CLEVIS

PIN

HAIRPIN

CLIP

ti 2

FIG. 17

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model NO. MXR500 HP 17 Inch Tiller Preparation Safety RulesMaintenance and Storage TrainingTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateKnow Your Tiller Meets Ansi Safety RequirementsOperation Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedADD Gasoline Before Starting EngineTurning To TransportTilling Hints Tine Shear PinsTo Start Engine See Fig Cultivating Adjust Wheels for Cultivating See FigsBefore Each USE MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTo Adjust Handle Height See Fig TillerTine Replacement See Figs , 25 To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTo Remove Belt Guard See Fig To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Limited Warranty

MXR500 specifications

The Maxim MXR500 is a cutting-edge multi-channel audio mixer designed for professional sound engineers and musicians. Renowned for its robust construction and versatile features, the MXR500 is tailored for both studio recording and live performance settings. This mixer combines advanced technology with user-friendly controls, making it an ideal choice for a wide range of audio applications.

One of the standout features of the MXR500 is its exceptional sound quality. The mixer is equipped with high-performance preamps that ensure crystal-clear audio recording and playback. Each channel boasts a 3-band EQ, allowing users to finely tune the tonal characteristics of individual audio sources. This capability is particularly beneficial in live settings, where adjusting sound on the fly is crucial.

The MXR500 supports up to 16 input channels, facilitating the mixing of multiple audio signals simultaneously. Each channel offers independent gain control, allowing users to balance levels accurately. The mixer also features built-in digital effects, including reverb and delay, enhancing the audio experience without the need for additional equipment.

In terms of connectivity, the MXR500 comes with a range of input and output options, including XLR and TRS connectors. This versatility enables seamless integration with microphones, instruments, and other audio gear. Additionally, the mixer supports USB connectivity, making it easy to connect to computers for digital recording or live streaming.

The mixer’s interface is designed with ease of use in mind. Intuitive faders and knobs are clearly labeled, allowing sound engineers to make quick adjustments during performances. The bright LED meters provide visual feedback on audio levels, ensuring optimal mixing in various lighting conditions.

Durability is another hallmark of the Maxim MXR500. Constructed with high-quality materials, this mixer is built to withstand the rigors of both studio and on-the-road use. The compact design also makes it portable, ideal for musicians who need to transport their equipment frequently.

In conclusion, the Maxim MXR500 is a powerful and versatile audio mixer that meets the demands of professionals across different sectors. With its advanced features, exceptional sound quality, and durable construction, the MXR500 stands out as a reliable choice for any sound engineer or musician looking to elevate their audio production experience. Whether in the studio or on stage, the MXR500 delivers performance and quality that audio professionals can depend on.
Top Page Image Contents