Transmission Assembly
Illustration 4
Continued from page 2
Never adjust the machine or change attachments until the engine has been turned off and the spark plug wire discon- nected. It is possible that the engine could start while mak- ing an adjustment or repair.
If carburetor adjustment is necessary, stand to one side and keep feet and hands in the clear while making adjust- ments.
Keep engine free from accumulations of grass, leaves, or excessive grease. An accumulation of these combustible materials may result in a fire.
Store gasoline in a safe container. Store the container in
a cool, dry place, not in the house or near heating appli- ances.
Never store machine with fuel in the fuel tank inside a build- ing where open flame or sparks are present. Allow engine to cool before storing in any enclosure.
Keep the machine and fuel container in locked storage to prevent children from playing and tampering with them.
Maximum operating results and safety can only be expect- ed if the machine is maintained and operated correctly.
Always refer to operator’s manual for important details if tiller is to be stored for extended period.
IMPORTANT: THIS UNIT IS EQUIPPED WITH AN INTERNAL COMBUSTION ENGINE, AND SHOULD NOT BE USED ON OR NEAR ANY UNIMPROVED
IN THE STATE OF CALIFORNIA A SPARK ARRESTER IS REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA PUBLIC RESOURCES CODE). OTHER STATES MAY HAVE SIMILAR LAWS. FED- ERAL LAWS APPLY ON FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE CENTER FOR A SPARK ARRESTER.
WARNING
The engine exhaust from this product contains chemicals know to the State of California to cause cancer, birth defects, or other reproductive harm.
Specifications
Engine: Briggs & Stratton 4 cycle
5.5Intek, 1264120226E1C1032
Air Cleaner: Replaceable Paper Element
Fuel Tank: 3 Quarts
Throttle: On Handle Panel
Transmission: Roller chain and sprocket, sealed and running in oil.
Tines: 14” slasher,
Tine Speed: Approximately 78 RPM maximum
Tilling Width: 14” to 26” standard
Tilling Depth: Up to 12”
Handle: 14 gauge seamless tubular steel with braces
Clutch: Hand controlled belt tightener
Frame: All steel, welded and braced
Wheels: 10 x 1.75
Approximate Shipping Weight:
5hp
3hp
Contents
Safe Practices for Garden Tillers | |
Specifications | 3 |
General Information | 5 |
Operation | 6 |
Adjustments | 7 |
Maintenance | 7 |
Parts Lists | |
Warranty | 12 |
10 | 3 |