Craftsman 917-299751 owner manual Operation, HOW to USE Your Tiller, Depth Stake See Fig, Engine

Page 10

OPERATION

The operation of any tiller can result In foreign oblects thrown Into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling° We recommend wide vision safety mask for over the spectacles or standard safety glasses,

HOW TO USE YOUR TILLER

Know how to operate all controls before adding fuel and oil or attempting to start engine.

STOPPING (See Fig. 9)

TINES AND DRIVE

•Release drive control bar to stop movement.

•Move shift lever to "N" (neutral) position.

ENGINE

•Move throttle control to "STOP" position,

•Never use choke to stop engine.

DRIVE CONTROL BAR "ENGAGED" POSITION

,SHIFT LEVER

DRIVE CONTROL BAR "DISENGAGED" POSITION

FIG. 9

TINE OPERATION - WITH WHEEL DRIVE

•A_ways release drive control bar'before moving shift lever into another position.

•Tine movement is achieved by moving shift lever to "T" (till) position and engaging drive control bar_

FORWARD - WHEELS ON LYiTINES STOPPED

•Release drive control bar and move shift leverindicator to "F" (forward) position. Engage drive control bar and tiller will move forward_

REVERSE - WHEELS ONLY/TINES STOPPED

•DO NOT STAND DIRECTLY BEHIND TILLER.

•Release the drive control bar.

•Move thJ:ottlecontrol to "SLOW" position.

. Move shift lever indicator to "R" (reverse) position°

°Hold drive control bar against the handle to start tiller movement.

DEPTH STAKE (See Fig. 10)

The depth stake canbe raised or toweredto aUowyou more versatile tilling and cultivating, or to more easily transport your tiller°

/......

SHALLOWESTPOSITION TILLING

TILLING

STAKE

DEPTH-_

FIG. 10

TILLING (See Fig. 11)

•Release depth stake pin. Pull the depth stake up for increased tilling depth, Place depth stake pin in hole of depth stake to lock in position°

•Place shift lever indicator in 'T' position.

°Hold the drive control bar against the handle to start tilling movement. Tines and wheels will both turn.

•Move throttle control to"FAST" position for deeptilling, To cultivate, throttle control can be set at any desired

speed, depending on how fast or slow you wish to cultivate.

DEPTH STAKE PiN

"RELEASED" POSITION

\

"LOCKED"

POSITION

OUTERNUT "B"

SIDE SHIELD

FIG. 11

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CRRFrZMR# Rear Tine Tiller WTH Counter Rotating TinesTraining Maintenance and Storage OperationPreparation Maintenance Agreement Limited ONE Year Warranty on Craftsman TillerProduct Specifications Customer ResponsibilitiesTable of CON Tines Clevis PIN TillerPlug Muffler AIR Filter GAS can Engine BeltTo Assemble Your Tiller YOU will Need Contents of Hardware PackOperators Position See Fig Handle LocksUnpacking Carton See Fig Install Handle See Figs , 4,Move Remove Tiller from Crate AssemblyConnect Shift ROD See Fig Insert Cable Clip See FigSafety Decal Meets Ansi Safety RequirementsDeca! shown below is located on the handle of your tiller Depth Stake See Fig HOW to USE Your TillerOperation EngineADD Gasoline Before Starting EngineOuter Side Shields See Fig TransportingTilling Hints Tine Shear PinsTo Start Engine See Fig Handling your tiller, start actual fieldCultivating FigsInner View of Tire Before Each USE Lubrication ChartCustomer Responsibilities LubricationEngine AIR Cleaner See FigCooling System See Fig Spark Plug AdjustmentsCleaning TransmissionTo Remove Belt Guard See Fig Ervnce and AdjustmentsGround Drive Belt Adjustment See To Replace Ground Drive Belt See FigsSee Figs , 27 Tine ReplacementGloves or other Protection when han Dling tines FIG+27Idle RPM Adjustment To Adjust Throttle Control Cable See FigFinal Setting ErviceStorage Engine OILTFtOUEILESHOOT NG Points Handles KEY Part Description MAINFRAME, Left Side KEY Part Description NO. no MAINFRAME, Right Side KEY Part Description NO. no KEY Part NO. no T6-18Tine Shield KEY Part Description NO, no Standard Hardware +PURCHASE LocallyWasher, Lock 3/8 6555J Tine, Inner, R.H Part DescriptionNut, Hex 3/8-24 6554J Tine, Inner, L.H 74610616 Bolt, Hex 3/8-24x6t5 614 191 392526 621 KEY Part DescriptionENGINE, Brggs & Stratton - Model Number 130202, Type no Model Number HOW to Order Repair PartsEngine Model Number 130202, Type Number

917-299751 specifications

The Craftsman 917-299751 is a robust and efficient lawn tractor designed for homeowners seeking a reliable solution for their lawn care needs. This model features a powerful 19 horsepower Briggs & Stratton engine, providing ample power to handle a variety of terrain and mowing conditions. With a 42-inch cutting deck, the 917-299751 is well-suited for medium to large lawns, effectively reducing mowing time while ensuring a clean, even cut.

One of the standout features of the Craftsman 917-299751 is its Easy Start System. This technology allows for effortless starting, which is particularly convenient for users who may struggle with traditional pull-start engines. The engine is also equipped with a durable air filter that ensures optimal performance and longevity, minimizing maintenance needs.

The 917-299751 comes with a hydrostatic transmission, allowing for smooth and intuitive operation. This feature enables the operator to easily control the speed without needing to change gears, making it ideal for navigating obstacles like trees and flower beds. Additionally, the tight turning radius of the tractor enhances maneuverability, making it easier to reach difficult areas in the yard.

Comfort is another important aspect of the Craftsman 917-299751. The tractor is equipped with an adjustable high-back seat that provides added comfort during extended mowing sessions. The ergonomic layout of the controls ensures ease of access, allowing users to operate the mower with minimal effort.

For added versatility, the Craftsman 917-299751 supports various attachments, including mulchers and baggers. This compatibility allows users to customize their mowing experience based on their lawn care requirements. The tractor also features a washout port, enabling easy cleaning of the cutting deck after use, promoting maintenance and extending the life of the mower.

Built with durability in mind, the Craftsman 917-299751 is constructed with a robust frame and high-quality materials, ensuring it can withstand regular use over the years. The larger rear tires add stability and traction, allowing the mower to perform well even on uneven or hilly terrains.

In summary, the Craftsman 917-299751 combines power, comfort, and convenience, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its array of user-friendly features and durable construction, this lawn tractor is designed to meet the demands of any mowing job, while providing a satisfying user experience.
Top Page Image Contents