Craftsman 917-299751 owner manual TFtOUEILESHOOT NG Points

Page 21

TFtOUEI;LESHOOT NG POINTS

iiJLLJII

PROBLEM

Will not start

Hard to start

Loss of power

Excessive bounce/ difficult handling

Soil balls up or clumps

Engine rune but tiller won't move

Engine runs but labors when tllllng

CAUSE

1, Outoffuel.

2Engine not "CHOKED" properly, 3, Engine flooded,

4, Dirty air cleaner 5, Water In fuel,

6, Clogged fuel tank

7, Loose spark plugwire

8, Bad spark plug or Improper gap, 9., Carburetor out of adfustment

1_ Throttle control not set properly,

2, Dirty air cleaner,

3Bad spark plug or improper gap, 4, Stale or dirty fuel

5.Loose spark plug wire.

6Carburetor outof adjustment,

1,. Engine Is overloaded 2, Dirty air cIeaner,

3, Low oil leve!/dirty oil. 4, Faulty spark plug,

5.O11in fuel,

6o Stale or dirtyfuel.

7r Water In fuel,

8Cfogged fuel tank,

9, Spark plug wire loose., 10o Dirty engine alr screen,

11.Dtrtytclogged muffler.

12.Carburetor out of adjustment

13.Poorcompressfon.

1, Ground too dry and hard,

1.Ground too wet,

1, Drive control bar Is not engaged.

2.V-belt not correctly adjusted,

3.V-belt Isoff pulley(s),

1, Tilling too deep,

2Throttle control not properly adjusted.

3 Carburetor out of adjustment

CORRECTION

1, Fill fuel tank.

2, See "TO START ENGINE" in Operation section. 3, Watt several minutes before attempting to start

4o Replace air cleaner cartridge,

5, Drain fuel tank and carburetor, and refill tank with fresh

gasoline.

6 Remove fuel tank and clean_

7_ Make sure spark plug wire Is seated properly on plug

8.Replace spark plug or adjust gap. 9, Make necessary edjustments_

1.Place throttle control fn =FAST" position, 2, Replace air cleaner cartridge,

3, Replace spark plug or adjust gap,

4, Drain fuel tank and refill wlth fresh gasoline.

5.Make sure spark pfug wire Is seated property on plug,

6.Make necessary adjustments,

t4 Set depth stake for shallower tilling

2, Replace air cleaner cad.ridge, 3, Check oll leveltchange oi!.

4o Clean and regap or change spark plug,

5, Drain and clean fuel tank and refill, and clean carburetor, 6, Drain fuel tank and reft{Iwith fresh gasoline

7, Drain fuel tank and carburetor, and refIlt tank with fresh gasoline,

8, Remove fuel tank and clean,

9, Connect and tighten spark plug wire

10.Clean engine air screen., 11, Clean!replace muffler,

12,. Make necessary adjustments

13, Contact an authorized service center,

I, Moisten ground or welt for more favorable soil

conditions,

1.Waltfor morefavorable sellconditions,

1, Engage drive control

2, Inspect/adjust V-belL

3.inspect V-beltr

1- Set depth stake for shallower tilling, 2, Check throttle control setting,

3, Make necessary adjustments,

Tines wlll not rotate

Shear pin(s) broken

!.

Replace shear pin(s),

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Rear Tine Tiller WTH Counter Rotating Tines CRRFrZMR#Maintenance and Storage Operation TrainingPreparation Product Specifications Limited ONE Year Warranty on Craftsman TillerMaintenance Agreement Customer ResponsibilitiesTable of CON Plug Muffler AIR Filter GAS can Engine TillerTines Clevis PIN BeltOperators Position See Fig Contents of Hardware PackTo Assemble Your Tiller YOU will Need Handle LocksInstall Handle See Figs , 4, Unpacking Carton See FigMove Connect Shift ROD See Fig AssemblyRemove Tiller from Crate Insert Cable Clip See FigMeets Ansi Safety Requirements Safety DecalDeca! shown below is located on the handle of your tiller Operation HOW to USE Your TillerDepth Stake See Fig EngineOuter Side Shields See Fig Before Starting EngineADD Gasoline TransportingTo Start Engine See Fig Tine Shear PinsTilling Hints Handling your tiller, start actual fieldFigs CultivatingInner View of Tire Customer Responsibilities Lubrication ChartBefore Each USE LubricationAIR Cleaner See Fig EngineCooling System See Fig Cleaning AdjustmentsSpark Plug TransmissionGround Drive Belt Adjustment See Ervnce and AdjustmentsTo Remove Belt Guard See Fig To Replace Ground Drive Belt See FigsGloves or other Protection when han Dling tines Tine ReplacementSee Figs , 27 FIG+27Final Setting To Adjust Throttle Control Cable See FigIdle RPM Adjustment ErviceEngine OIL StorageTFtOUEILESHOOT NG Points Handles KEY Part Description MAINFRAME, Left Side KEY Part Description NO. no MAINFRAME, Right Side KEY Part Description NO. no T6-18 KEY Part NO. noStandard Hardware +PURCHASE Locally Tine Shield KEY Part Description NO, noNut, Hex 3/8-24 Part DescriptionWasher, Lock 3/8 6555J Tine, Inner, R.H 6554J Tine, Inner, L.H 74610616 Bolt, Hex 3/8-24x6t5 614 392 191526 621 Description KEY PartENGINE, Brggs & Stratton - Model Number 130202, Type no HOW to Order Repair Parts Model NumberEngine Model Number 130202, Type Number

917-299751 specifications

The Craftsman 917-299751 is a robust and efficient lawn tractor designed for homeowners seeking a reliable solution for their lawn care needs. This model features a powerful 19 horsepower Briggs & Stratton engine, providing ample power to handle a variety of terrain and mowing conditions. With a 42-inch cutting deck, the 917-299751 is well-suited for medium to large lawns, effectively reducing mowing time while ensuring a clean, even cut.

One of the standout features of the Craftsman 917-299751 is its Easy Start System. This technology allows for effortless starting, which is particularly convenient for users who may struggle with traditional pull-start engines. The engine is also equipped with a durable air filter that ensures optimal performance and longevity, minimizing maintenance needs.

The 917-299751 comes with a hydrostatic transmission, allowing for smooth and intuitive operation. This feature enables the operator to easily control the speed without needing to change gears, making it ideal for navigating obstacles like trees and flower beds. Additionally, the tight turning radius of the tractor enhances maneuverability, making it easier to reach difficult areas in the yard.

Comfort is another important aspect of the Craftsman 917-299751. The tractor is equipped with an adjustable high-back seat that provides added comfort during extended mowing sessions. The ergonomic layout of the controls ensures ease of access, allowing users to operate the mower with minimal effort.

For added versatility, the Craftsman 917-299751 supports various attachments, including mulchers and baggers. This compatibility allows users to customize their mowing experience based on their lawn care requirements. The tractor also features a washout port, enabling easy cleaning of the cutting deck after use, promoting maintenance and extending the life of the mower.

Built with durability in mind, the Craftsman 917-299751 is constructed with a robust frame and high-quality materials, ensuring it can withstand regular use over the years. The larger rear tires add stability and traction, allowing the mower to perform well even on uneven or hilly terrains.

In summary, the Craftsman 917-299751 combines power, comfort, and convenience, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its array of user-friendly features and durable construction, this lawn tractor is designed to meet the demands of any mowing job, while providing a satisfying user experience.
Top Page Image Contents