Craftsman 917.29604 owner manual Operation, Maintenance and Storage

Page 3

•Use extension cords and receptacles

as specified by the manufacturer for all units with electric drive motors or elec-

tric starting motors.

•Never attempt to make any adjustments while the engine (motor) is running (ex- cept where specifically recommended

by manufacturer).

OPERATION

•Do not put hands or feet near or under rotating parts.

•Exercise extreme caution when operat- ing on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

•After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the

damage before restarting and operating the tiller.

•Exercise caution to avoid slipping or fall- ing.

•If the unit should start to vibrate ab- normally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

•Stop the engine (motor) when leaving the operating position.

•Take all possible precautions when leav-

ing the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

•Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

•Do not run the engine indoors; exhaust fumes are dangerous.

•Never operate the tiller without proper guards, plates, or other safety protective devices in place.

•Keep children and pets away.

•Do not overload the machine capacity

by attempting to till too deep at too fast a rate.

•Never operate the machine at high speeds on slippery surfaces. Look be- hind and use care when backing.

•Never allow bystanders near the unit.

•Use only attachments and accessories

approved by the manufacturer of the tiller.

•Never operate the tiller without good vis- ibility or light.

•Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

•Keep machine, attachments, and ac- cessories in safe working condition.

•Check shear pins, engine mounting bolts, and other bolts at frequent inter- vals for proper tightness to be sure the equipment is in safe working condition.

•Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

•Always refer to the operator's guide

instructions for important details if the tiller is to be stored for an extended

period.

_ILLook for this symbol to point out important safety precautions. It means

CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

_IkCAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug in order to prevent acci- dental starting when setting up, transport- ing, adjusting or making repairs. _ILWARNING: Engine exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Craftsman Preparation TrainingOperation Maintenance and StorageAgreements ProductIIIIIII/Y @ Front Tools Required for AssemblyInstall Handle Operators PositionCheck Tire Pressure Insert Cable ClipConnect Shift ROD Remove Tiller from CrateKnow Your Tiller Tine Operation with Wheel Drive Drag StakeTurning To TransportBefore Starting Engine To Start Engine ADD GasolineTine Shear Pins Tilling HintsCultivating Adjust Wheels for Cultivating Outer View of TireInner View of Tire Maintenance Schedule General Recommendations Lubrication ChartLubrication To Change Engine OIL To Service PRE-CLEANERTo Service Cartridge Engine LubricationCleaning Tire Care To Remove Belt GuardTo Replace Ground Drive Belt Tine Replacement To Adjust Throttle Control Cable To Adjust CarburetorEngine Cylinder TillerEngine Fuel System Engine OILCause Correction Troubleshooting ChartCorrection ProblemGarantia Limitada DE DOS Anos Para LA Cultivadora Craftsman EntrenamientoOPERACI3N Mantenimiento Y ALMACENAMIEN- to Responsabilidades DEL Cliente 1111111/ @ Desempaque DE LA Caja DE Carton Herramientas Necesarias Para EL MontajePosicion DEL Operador Vista Desde EL Lado Derecho DE LA CultivadoraInsercion DE LA Abrazadera DEL Cable Remocion DE LA Cultivadora DE LA CajaAltura DEL Mango Barra DE Control DE LA Impulsion Indicador DE LA Palanca DE CambioMango DEL Arrancador DE Cula Marcha Hacia Adelante Ruedas SO- LAMENTE/BRAZOS Parados Como Usar SU CultivadoraParada Brazos Y LA Impulsion ES Difcil Cambiar LAS MarchasEN EL Jardin GiroCultivo Para EL TransportePara Hacer Arrancar EL Motor Agregue GasolinaConsejos Para Labrar CultivoClavijas DE Seguro Vista Exterior DE LA Llanta Ajuste DE LAS Ruedas Para EL CultivoLubricacion Programa DE MantenimientoRecomendaciones Generales Tabla DE Lubricacion Antes DE Cada USOPara DAR Servicio AL Cartucho Para Cambiar EL Aceite DEL MotorFiltro DE Aire Para DAR Servicio AL PrefiltroLimpieza Sistema DE EnfriamientoBuja TransmisionAjuste DE LA Correa DE Impulsion DE Recorrido Cuidado DE LAS LlantasPara Remover LA Rueda Para Cambiar LA Correa DE IMPUL- Sion DE RecorridoCambio DE Brazos Motor Para Ajustar EL Cable DE Control DE LA AceleracionPara Ajustar EL Carburador Otros CultivadoraMotor Sistema DE Combustible Aceite DEL MotorIdentificacion DE Problemas Problema Causa CorreccionLacion Problema KEY HandlesDescription MAINFRAME, Left SideKEY Part Description MAINFRAME, Right SideTransmission Tine Shield Tine Assembly Decals 418684%1034 11019LABEL KIT Replacement EngineEngine Gasket SET 109113416081597 Tiller - Model Number Seal-Valve Your Home

917.29604 specifications

The Craftsman 917.29604 is a robust and versatile riding mower that has gained recognition for its performance, durability, and user-friendly features. Designed for homeowners with medium to large lawns, this riding mower is engineered to handle a variety of terrains, providing efficient and reliable lawn care.

One of the standout features of the Craftsman 917.29604 is its powerful engine. Equipped with a 19 horsepower Briggs & Stratton engine, it ensures ample power to tackle tough grass and uneven ground. This engine is not only powerful but also easy to start, allowing users to get to work with minimal hassle. The automatic transmission system enhances the mowing experience by allowing smooth and effortless speed adjustments, making it suitable for various mowing conditions.

The mower features a 42-inch cutting deck, which strikes a balance between maneuverability and cutting efficiency. This deck size is ideal for navigating around trees, flower beds, and other obstacles in the yard while also allowing users to cover a larger area in less time. Additionally, the cutting height can be adjusted with six different settings, providing versatility for those who prefer different grass lengths.

Another notable technology integrated into the Craftsman 917.29604 is its Air Induction Mowing Technology. This innovative feature enhances airflow within the deck, resulting in a cleaner and more even cut. The deck design minimizes clumping, ensuring that grass clippings are evenly distributed, which contributes to a healthier lawn.

The ergonomics of the Craftsman 917.29604 are designed for user comfort. The high-back seat provides excellent support, and the steering wheel is positioned for easy maneuverability. The controls are easily accessible, allowing users to focus on mowing without distractions. Furthermore, the mower's compact size makes it easy to store in tight spaces or transport.

Maintenance is also simplified with the Craftsman 917.29604. The mower includes features such as a removable washout port, which makes cleaning the deck a breeze, and a straightforward maintenance schedule that ensures longevity and performance.

Overall, the Craftsman 917.29604 is an excellent choice for homeowners looking for a reliable, efficient, and easy-to-use riding mower. With its powerful engine, advanced cutting technologies, and user-friendly design, it stands out as a top contender in the riding mower market, ready to meet diverse lawn care needs.
Top Page Image Contents