Bush Hog RTC manual Dealer Preparation Check List, Rotary Tillers

Page 5

DEALER PREPARATION CHECK LIST

ROTARY TILLERS

BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator’s Manual as a guide.

r r r r r r r r r

1.Assembly completed.

2.Gearboxes filled with oil.

3.All fittings lubricated.

4.All shields in place and in good condition.

5.All fasteners torqued to specifications given in Torque Chart.

6.Slip clutch checked for proper operation.

7.All decals in place and readable. (See decal page.)

8.Overall condition good (i.e. paint, welds)

9.Operators manual has been delivered to owner and he has been instructed on the safe and proper use of the cutter.

Dealer’s Signature

Purchaser’s Signature

THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyRotary Tillers Dealer Preparation Check ListImportant Safety Precautions Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsIntroduction Introduction and DescriptionAttaching to Tractor Section Preparation for USEStabilizer Bars Lift Arms Adjusting for Work General SafetySection Operating Instructions OperationMaintenance Check List Section MaintenanceWith the corresponding ones of the rigid cone Slip Clutch Operational Check Blade ReplacementSlip Clutch Adjustment Troubleshooting TroubleshootingSection Dealer Assembly Page Safety Decals American Torque Specifications
Top Page Image Contents