Craftsman 917.292394 owner manual AIR Cleaner, To Change Engine OIL

Page 12

_,CAUTION: Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine,

Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove

fuel from tank before tipping unit for maintenance. Clean muffler area of all

grass, dirt, and debris.

Do not touch hot muffler or cylinder fins as contact may cause burns.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SF, SG or

SH. Select the oil's SAE viscosity grade according to your expected temperature.

SAE VISCOSLTY GRADES

I

3_

20

30

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W- 30, 10W-30, etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F (O°C). Check your engine oil level more frequently to avoid

possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the tiller

is not used for 50 hours in one year. Check the crankcase oil level before

starting the engine and after each five (5) hours of continuous use. Add SAE 30 motor oil or equivalent. Tighten oil filler

plug securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range expected before oil change. All oil must meet API service classification SF, SG or SH.

•Be sure tiller is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove drain plug.

•Tip tiller forward to drain oil.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Remove oil filler plug. Be careful not to allow dirt to enter the engine.

•Refill engine with oil. See "CHECK

ENGINE OIL LEVEL" in the Operation section of this manual.

Oil Level

Fifler Plug

AIR CLEANER

Service air cleaner cartridge every twenty-five hours, more often if engine is used in very dusty conditions.

•Loosen air cleaner screws, one on each side of cover.

•Remove air cleaner cover.

•Carefully remove air cleaner cartridge. Be careful. Do not allow dirt or debris to fall into carburetor.

•Clean by tapping gently on a flat surface.

•If very dirty or damaged, replace cartridge.

•Clean and replace cover. Tighten screws securely.

£1,CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

Air Cleaner

Cover

 

Screw_

 

Air

 

Cleaner

 

Cartrid_

 

COOLING SYSTEM

Your engine is air cooled. For proper engine performance and long life keep your engine clean.

•Clean air screen frequently using a stiff- bristled brush.

•Remove blower housing and clean as necessary.

•Keep cylinder fins free of dirt and chaff.

lO

Page 11 Page 13
Image 12
Page 11 Page 13
Contents ICP nFTSMnN,I Limited ONE Year Warranty on Craftsman Tiller TrainingPreparation SEARS, Roebuckand CO., D/817WA, Hoffman ESTATES, ILMaintenance Andstorage Safety is InvolvedOperation Specifications Customer ResponsibilitiesTools Required For Assembly Operators PositionUnpack Carton & Install Handle Install Depth Stake AssemblyHandle Height Tilling WidthMeets Ansi Safety Requirements Know Your TillerHOW to USE Your Tiller StoppingTilling Depth StakeTo Start Engine ADD GasolineBreaking in Your Tiller Tilling HintsCultivating Schedule Maintenance General RecommendationsLubrication Before Each USEAIR Cleaner EngineTo Change Engine OIL Muffler TillerSpark Plug TransmissionTine Operation Check To Remove Belt GuardTo Replace V-BELT Narrow TILLING/CULTIVATING 12-3/4 PathBelt Replacement Idle RPM AdjustmentReplace Belt Guard Acceleration TestFuelsystem CylindersProblem Cause=IVI OutTiller - Model Number HandlesBelt Guard and Pulley Assembly Pulley, IdlerWheel and Depth Stake Assembly Tine Assembly Illeh - Model Number Decals 110719XENGINE, Briggs & Stratton --MODEL Number 134202, Type no -E1 901 8s1 KEY Part Description 621 Page Get it fixed, at your home or ours

917.292394 specifications

The Craftsman 917.292394 is a remarkable lawn tractor that exemplifies durability, efficiency, and ease of use. Designed for homeowners with medium to large-sized lawns, this riding mower combines power with innovative features, making it a favorite among lawn care enthusiasts.

One of the standout features of the Craftsman 917.292394 is its reliable engine. Powered by a robust 19 horsepower Briggs & Stratton engine, this tractor delivers reliable starting and performance in various conditions. The engine is paired with a hydrostatic transmission, which allows for seamless acceleration and easy operation, enabling the operator to focus on mowing without the hassle of shifting gears manually.

The cutting deck on the Craftsman 917.292394 is another feature that enhances its performance. With a cutting width of 42 inches, the mower can cover a substantial area in a single pass. The deck height is adjustable, allowing users to customize their mowing experience depending on the type of grass and the desired cut length. This flexibility not only contributes to a neat appearance but also promotes healthy grass growth.

For added convenience, this model includes a comfortable high-back seat, providing ample support during extended periods of mowing. The ergonomically designed steering wheel and intuitive control layout ensure that the operator can maneuver the tractor with ease, reducing fatigue over time.

The Craftsman 917.292394 also boasts several technologies aimed at improving efficiency and safety. Its turn radius is small, making it easy to navigate around obstacles like flower beds and trees. Additionally, the mower features anti-scalp wheels, which protect the lawn from damage while maintaining a clean cut.

Maintenance is simplified with the deck wash system, which allows for easy cleaning of the mower deck, ensuring optimal performance and longevity. The easy-access oil filter and maintenance-free battery contribute to hassle-free upkeep, making it suitable for users who may be less experienced with lawn equipment.

In conclusion, the Craftsman 917.292394 lawn tractor is a versatile and reliable option for homeowners who take pride in their lawns. Its combination of power, comfort, and user-friendly features make it an excellent choice for maintaining a beautiful outdoor space. With thoughtful engineering and practical technologies, this lawn tractor continues to be a valuable asset for those who seek efficiency and quality in their yard care efforts.
Top Page Image Contents