Craftsman 917.292394 Tine Operation Check, To Remove Belt Guard, To Replace V-BELT, Belt Removal

Page 14

NARROW TILLING/CULTIVATING - 12-3/4" PATH

• Remove outer tines.

ool

_ _nerTinesOr

NOTE: When reassembling outer tines, be sure right tine assembly (marked "R")

and left tine assembly (marked "L") are mounted to correct side of tine shaft.

TINE OPERATION CHECK

_,CAUTION: Disconnect spark plug wire from spark plug to prevent starting while checking tine operation.

For proper tine operation, tine control lever

must be against control body and all slack removed from inner wire of control cable

when control is in the "OFF" (up) position. If lever and cable are loose, loosen cable clip at lower end of cable. Pull up on cable to remove slack, without extending spring

on end of cable, and retighten cable clip.

FINAL CHECK "OFF" POSITION

•With tine control "OFF" (up), push down on handle to raise tines off the ground.

•Slowly pull recoil starter handle while observing tines. Tines should not rotate.

•If tines rotate, inner wire of control cable is too tight which is extending lower spring and engaging tines. Loosen cable clip and push down on cable only enough to relieve spring tension.

Tighten cable clip.

•Recheck in "OFF" position and adjust if

necessary.

FINAL CHECK "ON" POSITION

•With tine control "ON" (held down to handle) push down on handle to raise tines off the ground.

•Slowly pull recoil starter handle while

observing tines. Tines should rotate forward.

•If tines do not rotate, inner wire of control cable is too loose. Loosen cable

clip and pull cable up to remove slack and retighten clip.

•Recheck in "ON" position and adjust if necessary.

NOTE: If "ON" position check required

adjustment, recheck "OFF" position adjustment to insure tines do not rotate

when control is "OFF" (up).

Tine Control "OFF'Position

Tine Control Cable

Cable Clip._ _//_._

TO REMOVE BELT GUARD

•Remove cap nut and washer from side of belt guard.

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure. Be sure slot in bottom of belt guard is under head of tine shield bolt and all nuts are tightened securely.

Screw

TO REPLACE V-BELT

Replace V-belt if it has stretched consider- ably or if it has cracks or frayed edges. Belt guard must be removed to service belt. See "TO REMOVE BELT GUARD" in this section of manual.

BELT REMOVAL

•Remove V-belt from transmission pulley first and then from engine pulley.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents ICP nFTSMnN,I Preparation Limited ONE Year Warranty on Craftsman TillerTraining SEARS, Roebuckand CO., D/817WA, Hoffman ESTATES, ILOperation Maintenance AndstorageSafety is Involved Specifications Customer ResponsibilitiesTools Required For Assembly Operators PositionHandle Height Unpack Carton & Install HandleInstall Depth Stake Assembly Tilling WidthMeets Ansi Safety Requirements Know Your TillerTilling HOW to USE Your TillerStopping Depth StakeTo Start Engine ADD GasolineCultivating Breaking in Your TillerTilling Hints Lubrication Schedule MaintenanceGeneral Recommendations Before Each USETo Change Engine OIL AIR CleanerEngine Spark Plug MufflerTiller TransmissionTo Replace V-BELT Tine Operation CheckTo Remove Belt Guard Narrow TILLING/CULTIVATING 12-3/4 PathReplace Belt Guard Belt ReplacementIdle RPM Adjustment Acceleration TestFuelsystem CylindersProblem Cause=IVI OutTiller - Model Number HandlesBelt Guard and Pulley Assembly Pulley, IdlerWheel and Depth Stake Assembly Tine Assembly Illeh - Model Number Decals 110719XENGINE, Briggs & Stratton --MODEL Number 134202, Type no -E1 901 8s1 KEY Part Description 621 Page Get it fixed, at your home or ours

917.292394 specifications

The Craftsman 917.292394 is a remarkable lawn tractor that exemplifies durability, efficiency, and ease of use. Designed for homeowners with medium to large-sized lawns, this riding mower combines power with innovative features, making it a favorite among lawn care enthusiasts.

One of the standout features of the Craftsman 917.292394 is its reliable engine. Powered by a robust 19 horsepower Briggs & Stratton engine, this tractor delivers reliable starting and performance in various conditions. The engine is paired with a hydrostatic transmission, which allows for seamless acceleration and easy operation, enabling the operator to focus on mowing without the hassle of shifting gears manually.

The cutting deck on the Craftsman 917.292394 is another feature that enhances its performance. With a cutting width of 42 inches, the mower can cover a substantial area in a single pass. The deck height is adjustable, allowing users to customize their mowing experience depending on the type of grass and the desired cut length. This flexibility not only contributes to a neat appearance but also promotes healthy grass growth.

For added convenience, this model includes a comfortable high-back seat, providing ample support during extended periods of mowing. The ergonomically designed steering wheel and intuitive control layout ensure that the operator can maneuver the tractor with ease, reducing fatigue over time.

The Craftsman 917.292394 also boasts several technologies aimed at improving efficiency and safety. Its turn radius is small, making it easy to navigate around obstacles like flower beds and trees. Additionally, the mower features anti-scalp wheels, which protect the lawn from damage while maintaining a clean cut.

Maintenance is simplified with the deck wash system, which allows for easy cleaning of the mower deck, ensuring optimal performance and longevity. The easy-access oil filter and maintenance-free battery contribute to hassle-free upkeep, making it suitable for users who may be less experienced with lawn equipment.

In conclusion, the Craftsman 917.292394 lawn tractor is a versatile and reliable option for homeowners who take pride in their lawns. Its combination of power, comfort, and user-friendly features make it an excellent choice for maintaining a beautiful outdoor space. With thoughtful engineering and practical technologies, this lawn tractor continues to be a valuable asset for those who seek efficiency and quality in their yard care efforts.
Top Page Image Contents