Craftsman 917.292394 owner manual Fuelsystem, Cylinders

Page 16

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

_I, CAUTION: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

Clean entire tiller (See "CLEANING" in the Maintenance section of this

manual).

Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUELSYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose, or tank during storage. also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

Drain the fuel tank.

Start the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storagq container. Always follow the mix ratio found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carbure

tor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug.

Pour 1 ounce (29 rnl) of oil through spark plug hole into cylinder.

Pull starter handle slowly several times to distribute oil.

Replace with new spark plug.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your unit indoors and cover it to give protection from dust and dirt+

Cover your unit with a suitable protec- tive cover that does not retain moisture.

Do not use plastic. Plastic cannot breathe which allows condensation to

form and will cause your unit to rust. IMPORTANT: Never cover tiller white

engine and exhaust areas are still warm.

16

Image 16
Contents ICP nFTSMnN,I Limited ONE Year Warranty on Craftsman Tiller TrainingPreparation SEARS, Roebuckand CO., D/817WA, Hoffman ESTATES, ILSafety is Involved Maintenance AndstorageOperation Specifications Customer ResponsibilitiesTools Required For Assembly Operators PositionUnpack Carton & Install Handle Install Depth Stake AssemblyHandle Height Tilling WidthMeets Ansi Safety Requirements Know Your TillerHOW to USE Your Tiller StoppingTilling Depth StakeTo Start Engine ADD GasolineTilling Hints Breaking in Your TillerCultivating Schedule Maintenance General RecommendationsLubrication Before Each USEEngine AIR CleanerTo Change Engine OIL Muffler TillerSpark Plug TransmissionTine Operation Check To Remove Belt GuardTo Replace V-BELT Narrow TILLING/CULTIVATING 12-3/4 PathBelt Replacement Idle RPM AdjustmentReplace Belt Guard Acceleration TestFuelsystem CylindersProblem Cause=IVI OutTiller - Model Number HandlesBelt Guard and Pulley Assembly Pulley, IdlerWheel and Depth Stake Assembly Tine Assembly Illeh - Model Number Decals 110719XENGINE, Briggs & Stratton --MODEL Number 134202, Type no -E1 901 8s1 KEY Part Description 621 Page Get it fixed, at your home or ours

917.292394 specifications

The Craftsman 917.292394 is a remarkable lawn tractor that exemplifies durability, efficiency, and ease of use. Designed for homeowners with medium to large-sized lawns, this riding mower combines power with innovative features, making it a favorite among lawn care enthusiasts.

One of the standout features of the Craftsman 917.292394 is its reliable engine. Powered by a robust 19 horsepower Briggs & Stratton engine, this tractor delivers reliable starting and performance in various conditions. The engine is paired with a hydrostatic transmission, which allows for seamless acceleration and easy operation, enabling the operator to focus on mowing without the hassle of shifting gears manually.

The cutting deck on the Craftsman 917.292394 is another feature that enhances its performance. With a cutting width of 42 inches, the mower can cover a substantial area in a single pass. The deck height is adjustable, allowing users to customize their mowing experience depending on the type of grass and the desired cut length. This flexibility not only contributes to a neat appearance but also promotes healthy grass growth.

For added convenience, this model includes a comfortable high-back seat, providing ample support during extended periods of mowing. The ergonomically designed steering wheel and intuitive control layout ensure that the operator can maneuver the tractor with ease, reducing fatigue over time.

The Craftsman 917.292394 also boasts several technologies aimed at improving efficiency and safety. Its turn radius is small, making it easy to navigate around obstacles like flower beds and trees. Additionally, the mower features anti-scalp wheels, which protect the lawn from damage while maintaining a clean cut.

Maintenance is simplified with the deck wash system, which allows for easy cleaning of the mower deck, ensuring optimal performance and longevity. The easy-access oil filter and maintenance-free battery contribute to hassle-free upkeep, making it suitable for users who may be less experienced with lawn equipment.

In conclusion, the Craftsman 917.292394 lawn tractor is a versatile and reliable option for homeowners who take pride in their lawns. Its combination of power, comfort, and user-friendly features make it an excellent choice for maintaining a beautiful outdoor space. With thoughtful engineering and practical technologies, this lawn tractor continues to be a valuable asset for those who seek efficiency and quality in their yard care efforts.