Electrolux FN620K Unpack Carton & Install Handle See Fig, Install Depth Stake Assembly See Fig

Page 5

ASSEMBLY

UNPACK CARTON & INSTALL HANDLE (See Fig. 2)

CAUTION: Be careful of exposed staples when handling or disposing of cartoning material.

IMPORTANT: WHEN UNPACKING AND ASSEMBLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLE(S).

•Cut cable ties securing handles.

•The handle may be assembled in high or low position. Slowly lift handle assembly up, route cable(s) as shown and align handle holes with desired handle panel hole and slot.

•Loosely assemble hardware as shown. Be sure the shorter (3/4" long) hex bolt is assembled in lower hole of handle. Repeat for opposite side. Tighten all hardware securely.

NOTE: Cables must not touch the muffler.

•Cut cable ties securing tiller to skid and remove tiller from skid.

•Remove screws securing depth stake to skid and dis- card the screws.

NUT LOCK

WASHER

TILLER

HANDLE

HANDLE

PANEL

HEX BOLT 5/16-18X1"

FLAT HEX BOLT

WASHER 5/16-18X3/4"

CABLE

TILLER

HANDLES

HANDLE

PANEL

BOLTS

FIG. 2

INSTALL DEPTH STAKE ASSEMBLY (See Fig. 3)

•Loosen nut “A”.

•Insert stake support between engine bracket halves with stake spring down.

•Bolt stake support to engine brackets with bolts, lock washers and nuts. Tighten securely. Tighten nut “A”.

•Depth stake must move freely. If it does not, loosen support bolt.

ENGINE BRACKET

HALVES

NUT “A”

DEPTH STAKE

SUPPORT

STAKE

SPRING

DEPTH

STAKE

SUPPORT

HEX BOLTS, BOLT

LOCK WASHERS,

AND HEX NUTS

FIG. 3

HANDLE HEIGHT

•Handle height may be adjusted to better suit operator. (See “HANDLE HEIGHT” in the Service and Adjust- ments section of this manual).

TILLING WIDTH

•Tilling width may be adjusted to better handle your tilling conditions (See “TINE ARRANGEMENT” in the Service and Adjustments section of this manual).

TINE OPERATION

•Check tine operation before first use. (See “TINE OP- ERATION CHECK” in the Service and Adjustments section of this manual).

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model NO. FN620K Maintenance and Storage Safety RulesTraining PreparationTable of Contents Contents of Hardware Pack AssemblyTools Required for Assembly Install Depth Stake Assembly See Fig Unpack Carton & Install Handle See FigHandle Height Tilling WidthKnow Your Tiller Meets Ansi Safety RequirementsOperation Stopping See Fig HOW to USE Your TillerTine Operation See Fig TillingFill Engine with OIL See Fig Before Starting EngineADD Gasoline To Start Engine See FigCultivating Breaking in Your TillerTilling Hints Lubrication Chart MaintenanceGeneral Recommendations Before Each USEEngine AIR Cleaner See FigMuffler CleaningSpark Plug TransmissionTo Adjust Handle Height See Fig Service and AdjustmentsTiller Tine ArrangementTo Remove Belt Guard See Fig Tine Operation Check See FigFinal Check OFF Position Final Check on PositionTo Replace V-BELT See Fig To Adjust CarburetorOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsTiller - Model Number FN620K Handle AssemblyKEY Part NO. NO. Description KEY Part Description12000035 Belt Guard and Pulley Assembly9194R Pin, Clevis Wheel and Depth Stake AssemblyTine Assembly Transmission 132629 Decal, Logo 163989 Decals184873 184874Limited Warranty

FN620K specifications

The Electrolux FN620K is a carefully designed freezer that combines efficiency, functionality, and modern technology to enhance food preservation and storage. This freezer is particularly suited for households that require ample freezing space while also ensuring that food retains its quality for extended periods.

One of the standout features of the FN620K is its generous storage capacity, with an impressive volume that allows for efficient organization of various food items. The interior is thoughtfully designed with adjustable shelves and baskets, making it easier for users to maximize space and access items without hassle. This flexibility means you can easily store everything from large bulk items to smaller everyday necessities.

A major technological advancement in the FN620K is its Frost Free technology. This innovation eliminates the need for manual defrosting by ensuring that frost buildup is minimized, thereby maintaining optimal storage conditions. This means users spend less time on maintenance and more time enjoying their food.

Energy efficiency is another important aspect of the Electrolux FN620K. It boasts an excellent energy rating, which translates to lower electricity bills while being environmentally friendly. With energy-saving features, the FN620K not only reduces energy consumption but also helps families save money in the long run.

The freezer is equipped with a fast freeze function, which is essential for rapidly cooling newly stored items. This function locks in freshness and nutritional value, making it ideal for preserving the quality of seasonal produce or bulk purchases. Additionally, the FN620K features an intuitive control panel, making it simple for users to monitor temperatures and adjust settings as needed.

To enhance safety, the freezer is built with an alarm system that alerts users in case of temperature fluctuations. This feature ensures that food remains safe and allows for timely intervention in case of power outages or other unforeseen events.

In terms of design, the Electrolux FN620K boasts a sleek and modern aesthetic that complements various kitchen styles. Its durable exterior is not only attractive but also easy to clean, ensuring that it remains a practical and stylish addition to any home.

Overall, the Electrolux FN620K freezer is a reliable appliance that prioritizes performance and user convenience. Combining innovative technology with user-friendly features, it stands out as an excellent choice for those seeking an effective freezing solution.
Top Page Image Contents