Electrolux FN620K owner manual Before Starting Engine, Fill Engine with OIL See Fig, ADD Gasoline

Page 8

OPERATION

BEFORE STARTING ENGINE

IMPORTANT: BE VERY CAREFUL NOT TO ALLOW DIRT TO ENTER THE ENGINE WHEN CHECKING OR ADDING OIL OR FUEL. USE CLEAN OIL AND FUEL AND STORE IN APPROVED, CLEAN, COVERED CONTAINERS. USE CLEAN FILL FUNNELS.

FILL ENGINE WITH OIL (See Fig. 7)

•With engine level, remove engine oil filler plug.

•Fill engine with oil to point of overflowing. For approx- imate capacity see “PRODUCT SPECIFICATIONS” on page 3 of this manual.

•Tilt tiller back on its wheels and then re-level.

•With engine level, refill to point of overflowing if nec- essary. Replace oil filler plug.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

•To change engine oil, see the Maintenance section of this manual.

OIL

LEVEL

OIL

FILLER

PLUG

FIG. 7

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Fill to within 1/2 inch of top of fuel tank to prevent spills and to allow for fuel expansion. If gasoline is ac- cidentally spilled, move machine away from area of spill. Avoid creating any source of ignition until gasoline vapors have disappeared.

Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can at- tract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE (See Fig. 8)

CAUTION: Keep drive control bar in “DISENGAGED” position when start- ing engine.

When starting engine for the first time or if engine has run out of fuel, it will take extra pulls of the recoil starter to move fuel from the tank to the engine.

•Make sure spark plug wire is properly connected.

•Move shift lever indicator to “N” (neutral) position.

•Place throttle control in “FAST” position.

•Move choke control to full “CHOKE” position. Grasp recoil starter handle with one hand and grasp tiller handle with other hand. Pull rope out slowly until en- gine reaches start of compression cycle (rope will pull slightly harder at this point).

•Pull recoil starter handle quickly. Do not let starter handle snap back against starter. Repeat if neces- sary.

•If engine fires but does not start, move choke control to half choke position. Pull recoil starter handle until engine starts.

•When engine starts, slowly move choke control to “RUN” position as engine warms up.

NOTE: A warm engine requires less choking to start.

•Move throttle control to desired running position.

•Allow engine to warm up for a few minutes before engaging tines.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32°F), the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

NOTE: If engine does not start, see troubleshooting points.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model NO. FN620K Safety Rules Maintenance and StorageTraining PreparationTable of Contents Contents of Hardware Pack AssemblyTools Required for Assembly Unpack Carton & Install Handle See Fig Install Depth Stake Assembly See FigHandle Height Tilling WidthKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller Stopping See FigTine Operation See Fig TillingBefore Starting Engine Fill Engine with OIL See FigADD Gasoline To Start Engine See FigCultivating Breaking in Your TillerTilling Hints Maintenance Lubrication ChartGeneral Recommendations Before Each USEAIR Cleaner See Fig EngineCleaning MufflerSpark Plug TransmissionService and Adjustments To Adjust Handle Height See FigTiller Tine ArrangementTine Operation Check See Fig To Remove Belt Guard See FigFinal Check OFF Position Final Check on PositionTo Adjust Carburetor To Replace V-BELT See FigStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionHandle Assembly Tiller - Model Number FN620KKEY Part NO. NO. Description KEY Part DescriptionBelt Guard and Pulley Assembly 12000035Wheel and Depth Stake Assembly 9194R Pin, ClevisTine Assembly Transmission Decals 132629 Decal, Logo 163989184873 184874Limited Warranty

FN620K specifications

The Electrolux FN620K is a carefully designed freezer that combines efficiency, functionality, and modern technology to enhance food preservation and storage. This freezer is particularly suited for households that require ample freezing space while also ensuring that food retains its quality for extended periods.

One of the standout features of the FN620K is its generous storage capacity, with an impressive volume that allows for efficient organization of various food items. The interior is thoughtfully designed with adjustable shelves and baskets, making it easier for users to maximize space and access items without hassle. This flexibility means you can easily store everything from large bulk items to smaller everyday necessities.

A major technological advancement in the FN620K is its Frost Free technology. This innovation eliminates the need for manual defrosting by ensuring that frost buildup is minimized, thereby maintaining optimal storage conditions. This means users spend less time on maintenance and more time enjoying their food.

Energy efficiency is another important aspect of the Electrolux FN620K. It boasts an excellent energy rating, which translates to lower electricity bills while being environmentally friendly. With energy-saving features, the FN620K not only reduces energy consumption but also helps families save money in the long run.

The freezer is equipped with a fast freeze function, which is essential for rapidly cooling newly stored items. This function locks in freshness and nutritional value, making it ideal for preserving the quality of seasonal produce or bulk purchases. Additionally, the FN620K features an intuitive control panel, making it simple for users to monitor temperatures and adjust settings as needed.

To enhance safety, the freezer is built with an alarm system that alerts users in case of temperature fluctuations. This feature ensures that food remains safe and allows for timely intervention in case of power outages or other unforeseen events.

In terms of design, the Electrolux FN620K boasts a sleek and modern aesthetic that complements various kitchen styles. Its durable exterior is not only attractive but also easy to clean, ensuring that it remains a practical and stylish addition to any home.

Overall, the Electrolux FN620K freezer is a reliable appliance that prioritizes performance and user convenience. Combining innovative technology with user-friendly features, it stands out as an excellent choice for those seeking an effective freezing solution.
Top Page Image Contents