Husqvarna 650RTT owner manual Service and Adjustments, Tiller, Tire Care

Page 14

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 20)

Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•First loosen handle lock lever.

•Handle can be positioned at different settings between “HIGH” and “LOW” positions.

•Retighten handle lock lever securely after adjusting.

HANDLE

(HIGH POSITION)

HANDLE LOCK

LEVER

HANDLE

(LOW POSITION)

FIG. 20

TIRE CARE

CAUTION: When mounting tires, un- less beads are seated,overinflation can cause an explosion.

•Maintain 20 PSI (1.4 kg/cm2) of tire pressure. If tire pressures are not equal, tiller will pull to one side.

•Keep tires free of gasoline or oil which can damage rubber.

TO REMOVE WHEEL (See Fig. 21)

•Place blocks under transmission to keep tiller from tipping.

•Remove outer side shield by removing nuts “A” and “B”.

•Remove inner side shield by removing nuts “C” and “D”.

•Remove hairpin clip and clevis pin from wheel.

•Remove wheel and tire.

•Repair tire and reassemble.

CLEVIS

 

PIN

 

NUT “C”

 

NUT

 

“D”

 

HAIRPIN

 

CLIP

 

 

4

NUT “B”

_

tire

 

NUT “A”

INNER SIDE

OUTER SIDE

SHIELD

SHIELD

 

FIG. 21

TO REMOVE BELT GUARD (See Fig. 22)

NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch.

•Remove two (2) screws from side of belt guard.

•Remove hex nut and washer from bottom of belt guard (located behind wheel).

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure.

BELT GUARD

SCREW

 

AND WASHER

HEX NUT AND WASHER (LOCATED BEHIND TIRE)

SCREW

 

AND

HAIRPIN CLIP AND

WASHER

CLEVIS PIN

 

FIG. 22

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 650RTT Training Safety RulesMaintenance and Storage PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Install Handle See Figs , 4, Unpacking Carton See FigRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline Before Starting EngineTo Transport Cultivating Tine Shear PinsTilling Hints Lubrication Chart MaintenanceMaintenance Schedule General RecommendationsEngine AIR Filter See FigSpark Plug CleaningMuffler Cooling System See FigTire Care Service and AdjustmentsTiller Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigTine Replacement See Figs , 25, To Adjust Throttle Control Cable See Fig To Adjust CarburetorFuel System StorageOther Engine OILTroubleshooting Points Repair Parts Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side KEY Part NO. NO. DescriptionTransmission19.5b Tine Shield Tine Assembly Decals Warranty Statement 532 18 89-00 Rev 12.05.03 TR/rad

650RTT specifications

The Husqvarna 650RTT is an innovative and high-performing rider ZERO turn mower designed for both residential and commercial use. Built with power and efficiency in mind, this mower is a favorite among users who require precision in their lawn care. One of the standout features of the 650RTT is its robust engine. With a powerful hydrostatic transmission and dual-cylinder engine, it offers exceptional torque and speed, making it suitable for tackling large areas of grass quickly and efficiently.

The cutting deck of the Husqvarna 650RTT is equipped with a 54-inch mower deck, which allows for a larger cutting width, reducing the amount of time needed to complete mowing tasks. The deck features a reinforced design that ensures durability and longevity, while the adjustable cutting heights provide flexibility depending on the type of grass and user preference. Users will find the Floating deck system particularly beneficial as it optimizes ground contour following, providing a consistent cut even on uneven terrain.

One of the highlights of the Husqvarna 650RTT is its advanced technology features. The integrated SmartSwitch™ technology simplifies starting the engine and operating the mower. This system increases reliability and reduces the complexity of controls, providing the user with a seamless experience. Moreover, the mower is equipped with an ergonomic steering wheel and comfortable seat, allowing for reduced fatigue during extended periods of use.

For maintenance, the Husqvarna 650RTT has been designed with user convenience in mind. The mower features a quick-release cutting blade system for easy blade replacements and routine maintenance. Additionally, the innovative design allows for easy access to various components for routine checks and maintenance.

In terms of safety, the Husqvarna 650RTT comes with several protective features, including the automatic blade brake and roll-over protection system, ensuring user safety during operation. The mower is also equipped with LED lights for increased visibility during early morning or late evening mowing sessions.

In summary, the Husqvarna 650RTT combines power, efficiency, and user-friendly features to deliver one of the best mowing experiences available in its class. With its high-performance engine, durable design, advanced technology, and safety features, it stands out as a reliable choice for any lawn maintenance task. Whether for professional landscaping or managing residential lawns, the 650RTT is a versatile and powerful mower that delivers exceptional results.
Top Page Image Contents