Husqvarna 650RTT owner manual To Adjust Throttle Control Cable See Fig, To Adjust Carburetor

Page 17

SERVICE AND ADJUSTMENTS

ENGINE

TO ADJUST THROTTLE CONTROL CABLE (See Fig. 27)

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is necessary, proceed as follows:

•With engine not running, move remote throttle control lever to “FAST” position.

•If throttle lever on engine touches high speed stop, no further adjustment is necessary. If throttle lever does not touch high speed stop, continue with adjustment procedure.

•Loosen cable clamp screw.

•Move throttle lever up until it touches high speed stop, and hold in this position.

•Tighten cable clamp screw securely.

CLAMP SCREW

CASING

AND WIRE

TO ADJUST CARBURETOR

The carburetor has been preset at the factory and adjustment should not be necessary. However, engine performance can be affected by differences in fuel, temperature, altitude or load. If the carburetor does need adjustment, contact your nearest authorized service center/department

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACTYOUR NEAREST AUTHORIZED SERVICE CENTER/ DEPARTMENT, WHICH HAS THE PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY NECESSARY ADJUSTMENTS.

engine_art_78

THROTTLE CONTROL

FIG. 27

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 650RTT Maintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline Before Starting EngineTo Transport Cultivating Tine Shear PinsTilling Hints Maintenance Schedule MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineMuffler CleaningSpark Plug Cooling System See FigTire Care Service and AdjustmentsTiller To Replace Ground Drive Belt See Fig Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILTroubleshooting Points Handle Assembly Repair PartsMAINFRAME, Left Side KEY Part NO. NO. Description MAINFRAME, Right SideTransmission19.5b Tine Shield Tine Assembly Decals Warranty Statement 532 18 89-00 Rev 12.05.03 TR/rad

650RTT specifications

The Husqvarna 650RTT is an innovative and high-performing rider ZERO turn mower designed for both residential and commercial use. Built with power and efficiency in mind, this mower is a favorite among users who require precision in their lawn care. One of the standout features of the 650RTT is its robust engine. With a powerful hydrostatic transmission and dual-cylinder engine, it offers exceptional torque and speed, making it suitable for tackling large areas of grass quickly and efficiently.

The cutting deck of the Husqvarna 650RTT is equipped with a 54-inch mower deck, which allows for a larger cutting width, reducing the amount of time needed to complete mowing tasks. The deck features a reinforced design that ensures durability and longevity, while the adjustable cutting heights provide flexibility depending on the type of grass and user preference. Users will find the Floating deck system particularly beneficial as it optimizes ground contour following, providing a consistent cut even on uneven terrain.

One of the highlights of the Husqvarna 650RTT is its advanced technology features. The integrated SmartSwitch™ technology simplifies starting the engine and operating the mower. This system increases reliability and reduces the complexity of controls, providing the user with a seamless experience. Moreover, the mower is equipped with an ergonomic steering wheel and comfortable seat, allowing for reduced fatigue during extended periods of use.

For maintenance, the Husqvarna 650RTT has been designed with user convenience in mind. The mower features a quick-release cutting blade system for easy blade replacements and routine maintenance. Additionally, the innovative design allows for easy access to various components for routine checks and maintenance.

In terms of safety, the Husqvarna 650RTT comes with several protective features, including the automatic blade brake and roll-over protection system, ensuring user safety during operation. The mower is also equipped with LED lights for increased visibility during early morning or late evening mowing sessions.

In summary, the Husqvarna 650RTT combines power, efficiency, and user-friendly features to deliver one of the best mowing experiences available in its class. With its high-performance engine, durable design, advanced technology, and safety features, it stands out as a reliable choice for any lawn maintenance task. Whether for professional landscaping or managing residential lawns, the 650RTT is a versatile and powerful mower that delivers exceptional results.
Top Page Image Contents