Husqvarna Essential Guide to Ground Drive Belt Diagram and Adjustments
Page 15

SERVICE AND ADJUSTMENTS

TO REPLACE GROUND DRIVE BELT (See Fig. 23)

•Remove belt guard (See “TO REMOVE BELT GUARD” in this section of this manual).

•Remove old belt by slipping off engine pulley first then remove from transmission pulley.

•Place new belt in groove of transmission pulley and into engine pulley. BELT MUST BE IN GROOVE ON TOP OF IDLER PULLEY. NOTE POSITION OF BELT TO GUIDES.

•Check belt adjustment as described below.

•Replace belt guard.

•Reposition wheel and replace clevis pin and hairpin clip.

GROUND DRIVE BELT ADJUSTMENT (See Fig. 23)

For proper belt tension, the extension spring should have about 5/8 inch stretch when drive control bar is in “ENGAGED” position. This tension can be attained as follows:

•Loosen cable clip screw securing the drive control cable.

•Slide cable forward for less tension and rearward for more tension until about 5/8 inch stretch is obtained while the drive control bar is engaged.

•Tighten cable clip screw securely.

CABLE CLIP SCREW

ENGINE

PULLEYDRIVE CONTROL CABLE

LESS

TENSION

 

 

MORE

5/8"

 

TENSION

IDLER

EXTENSION

SPRING

PULLEY

TRANSMISSION PULLEY

 

FIG. 23

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 650RTT Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateMeets Ansi Safety Requirements OperationKnow Your Tiller HOW to USE Your Tiller Before Starting Engine To TransportADD Gasoline Tine Shear Pins Tilling HintsCultivating General Recommendations MaintenanceMaintenance Schedule Lubrication ChartAIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugService and Adjustments TillerTire Care To Replace Ground Drive Belt See Fig Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Handle Assembly Repair PartsMAINFRAME, Left Side KEY Part NO. NO. Description MAINFRAME, Right SideTransmission19.5b Tine Shield Tine Assembly Decals Warranty Statement 532 18 89-00 Rev 12.05.03 TR/rad

650RTT specifications

The Husqvarna 650RTT is an innovative and high-performing rider ZERO turn mower designed for both residential and commercial use. Built with power and efficiency in mind, this mower is a favorite among users who require precision in their lawn care. One of the standout features of the 650RTT is its robust engine. With a powerful hydrostatic transmission and dual-cylinder engine, it offers exceptional torque and speed, making it suitable for tackling large areas of grass quickly and efficiently.

The cutting deck of the Husqvarna 650RTT is equipped with a 54-inch mower deck, which allows for a larger cutting width, reducing the amount of time needed to complete mowing tasks. The deck features a reinforced design that ensures durability and longevity, while the adjustable cutting heights provide flexibility depending on the type of grass and user preference. Users will find the Floating deck system particularly beneficial as it optimizes ground contour following, providing a consistent cut even on uneven terrain.

One of the highlights of the Husqvarna 650RTT is its advanced technology features. The integrated SmartSwitch™ technology simplifies starting the engine and operating the mower. This system increases reliability and reduces the complexity of controls, providing the user with a seamless experience. Moreover, the mower is equipped with an ergonomic steering wheel and comfortable seat, allowing for reduced fatigue during extended periods of use.

For maintenance, the Husqvarna 650RTT has been designed with user convenience in mind. The mower features a quick-release cutting blade system for easy blade replacements and routine maintenance. Additionally, the innovative design allows for easy access to various components for routine checks and maintenance.

In terms of safety, the Husqvarna 650RTT comes with several protective features, including the automatic blade brake and roll-over protection system, ensuring user safety during operation. The mower is also equipped with LED lights for increased visibility during early morning or late evening mowing sessions.

In summary, the Husqvarna 650RTT combines power, efficiency, and user-friendly features to deliver one of the best mowing experiences available in its class. With its high-performance engine, durable design, advanced technology, and safety features, it stands out as a reliable choice for any lawn maintenance task. Whether for professional landscaping or managing residential lawns, the 650RTT is a versatile and powerful mower that delivers exceptional results.
Top Page Image Contents