Table of Contents
Section 4 Maintenance and Lubrication
Storage
!CAUTION
Engage parking brake, disengage PTO, shut off tractor, and remove key before making any of the following adjustments.
At the end of the working season or when the tiller will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on any of the moving parts.
Check the tines for wear and replace if necessary. See Tine Replacement in this section.
Inspect the tiller for loose, damaged or worn parts and adjust or replace if needed.
Lubricate as noted in Lubrication in this section.
Repaint parts where paint is worn or scratched to prevent rust.
Drain gearbox and chaincase oil. Drain oil in gearbox by removing the bottom drain plug, or right hand cap. Drain oil in chaincase by removing the bottom plug and tipping tiller backwards. Be sure to refill gearbox and chaincase at this time.
Store tiller in a clean, dry place.
Inspect the tiller for loose, damaged or worn parts and adjust or replace if needed.
Land Pride
20 RTA10 & RTA15 Series Rotary Tillers | 5/05/06 |