Toro 860S specifications Introduction, Features, Specifications and Performance/Application Data

860S and 880S Series Rotary Sprinklers

Installation & Service Instructions

Introduction _____________________________________________________________________

The 860S and 880S series full circle and adjustable part-circle rotary sprinklers are designed specifically for golf course applications.

Manufactured from durable, high-strength engineering plastic and stainless-steel components, the 800S series sprinklers incorporate many innovative and time- proven features for lasting, maintenance-free operation.

Prior to installing the sprinkler, read through the recommended installation and start-up procedures. Please observe all WARNINGS and CAUTIONS when installing and operating this equipment.

860S Electric VIH880S Electric VIH

Features ________________________________________________________________________

■Adjustable part-circle (30°–330°) and full circle models available

■Arc adjustment from top of sprinkler

■Standard stainless-steel riser resists scoring from embedded debris

■Full 3" (7.6 cm) pop-up clears tall grasses

■Nozzles color-coded by radius and gallonage

■Cap serves as an effluent water indicator

■Variable stator

■Standard pressure regulation settings of 50 psi (3.4 bar), 65 psi (4.5 bar), 80 psi (5.5 bar) or 100 PSI (6.9 bar) to ensure consistently accurate nozzle performance regardless of elevation

■Three body activation types available: Electric VIH, Normally Open Hydraulic VIH, and Check-O-Matic

■Three body thread types available: NPT, BSP and ACME

■Manual control at the sprinkler, On-Off-Auto (Electric only)

■Bowl-vented discharge (atmospheric) minimizes the differential pressure required for regulation and ensures positive valve closure (electric models only)

■All internal components serviceable from the top of the sprinkler

■Large selection of color-coded nozzles available

■Durable plastic and stainless-steel construction

■Spike-GuardTMsolenoid for superior surge protection

Specifications and Performance/Application Data ______________________________________

860S Series

■Radius: 54'–80' (16.4 m–24.4 m)

■Flow Rate: 14.1–44.5 GPM (44.3–155.9 l/mn)

■Trajectory: 25°

■Arc: Full Circle or Adjustable Part Circle (30°–330°)

■Recommended Operating Pressure: 50–100 PSI (3.4–6.9 bar)

■Minimum Pressure: 40 PSI (2.8 bar)

■Maximum Pressure: 150 PSI (10.3 bar)

■Precipitation Rate:

■Minimum: 0.37"/hr (9.4 mm/hr)

■Maximum: 0.75"/hr (19.1 mm/hr)

■Body Height: 10" (25.4 cm)

■Pop-Up Height: 3" (7.6 cm)

■1" NPT, BSP or ACME Female Thread Inlet

■Spike GuardTM Solenoid:

■24 V a.c., 50/60 Hz

■Inrush Current: 50 Hz, 0.17 Amps (4.1 VA)

60 Hz, 0.12 Amps (2.9 VA)

■Holding Current: 50 Hz, 0.15 Amps (3.6 VA) 60 Hz, 0.10 Amps (2.4 VA)

■Manual Control: On-Off-Auto

■Check-O-Matic model checks up to 37' (11.2 m) of elevation.

■Color-coded Nozzles (see nozzle color code chart, p. 3)

880S Series

■Radius: 53'–83' (16.2 m – 25.3 m)

■Flow Rate: 14.3–52.9 GPM (54.1–200.2 l/mn)

■Trajectory: 25°

■Arc: Full Circle or Adjustable Part Circle 30°–330°

■Recommended Operating Pressure: 50–100 PSI (3.4–6.9 bar)

■Minimum Pressure: 40 PSI (2.8 bar)

■Maximum Pressure: 150 PSI (10.3 bar)

■Precipitation Rate:

■Minimum: 0.39"/hr (9.9 mm/hr)

■Maximum: 0.74"/hr (18.8 mm/hr)

■Body Height: 11" (27.9 cm)

■Pop-Up Height: 3" (7.6 cm)

■1.5" NPT, BSP or ACME Female Thread Inlet

■Spike GuardTM Solenoid:

■24 V a.c., 50/60 Hz

■Inrush Current: 50 Hz, 0.17 Amps (4.1 VA)

60 Hz, 0.12 Amps (2.9 VA)

■Holding Current: 50 Hz, 0.15 Amps (3.6 VA) 60 Hz, 0.10 Amps (2.4 VA)

■Manual Control: On-Off-Auto

■Check-O-Matic model checks up to 37' (11.2 m) of elevation.

■Color-Coded Nozzles (see nozzle color code chart, p. 3)

1