Introduction, Specifications | Toro 69X-02-XX instruction

INSTALLATION & SERVICE INSTRUCTIONS 690 Series Rotary Sprinkler

Introduction

The 690 Series Rotary Sprinkler is designed for irrigation of large turf areas such as golf courses, parks, recreational fields and school grounds.

Manufactured from durable, high strength engineering plastic and stainless steel components, the 690 sprinkler incorporates many innovative and time proven features for lasting, maintenance-free operation. Some of these features are listed below.

Model 69X-06-XX

Specifications

•	78 ft. – 108 ft. Radius
•	Pop-Up Nozzle and Cap -	7 ⁄8 in.

•1 1 ⁄2 in. NPT Female Thread Inlet

•Recommended Operating Pressure: 60 – 100 PSI

•Maximum Pressure: 150 PSI

•Electric Models:

–Solenoid - 24 VAC

–Inrush Current - .40 Amps

–Holding Current - .235 Amps

•Dimensions:

– Cap Diameter - 7

1 ⁄2 in.

–Flange Diameter - 10 in.

–Height - 16 in.

Model 69X-01-XX

Model 69X-02-XX

Features

•Positive Spring Retraction - Pulls nozzle and cap down out of the way of people and turf maintenance equipment.

•Three Nozzle Sizes - Multiple nozzle sizes provide 45.1 to 82.2 GPM flow and produce watering radii from 78 to 108 feet.

•Long Life Gear Drive - Gear drive mechanism is vacuum-packed with

lubricant and isolated from water stream for long, trouble-free life.

•Valve-In-Head Models - Permits head-by-head control to customize turf watering for various topography and soil conditions. Multi-cycle for

wind or runoff problems, frost control and dew removal without low-head drainage. Available for hydraulic normally open or 24 Volt electric systems.

•Sprinkler Operating Mode - Electric valve-in-head models have three modes of operation; AUTO, ON and OFF. Mode is set using a selector

tool inserted through the sprinkler body flange.

•Built-in Check Valve - Check-o-matic sprinklers utilize a check valve in the sprinkler base to prevent seepage from low area heads after valve

closure. Check valve will hold up to 35 feet of elevation differential.

•Two-Speed / 60°-120° Models - Provides for more even precipitation. Runs at half speed in non-overlapping areas.

•Two-Speed / 180° Models - Provides for more even precipitation where only a selected area is covered by an overlap, such as is found on

greens. Runs at half speed in non-overlapping areas.

•Serviceability - All internal parts of the sprinkler are accessible through

the top of the sprinkler body.

69X-01-XX, 69X-02-XX, 69X-06-XX specifications

The Toro 69X series, comprising models 69X-01-XX, 69X-02-XX, and 69X-06-XX, represents the pinnacle of modern landscaping technology. These innovative machines are designed to enhance efficiency and performance in various landscaping tasks while prioritizing user comfort and environmental sustainability.

One of the main features of the Toro 69X series is its robust engine performance. Equipped with a high-efficiency powertrain, these models ensure optimal torque and power delivery, enabling users to tackle challenging terrain and heavy workloads with ease. The engine's design minimizes fuel consumption, which not only reduces operating costs but also contributes to a lower carbon footprint, aligning with contemporary environmental standards.

In addition to powerful engines, the Toro 69X series boasts an advanced cutting system that enhances precision and consistency in lawn maintenance. The cutting decks are engineered for versatility, allowing for a wide range of adjustments to accommodate different grass types and conditions. This adaptability ensures that users achieve the highest quality cuts while minimizing clippings left behind.

Another significant characteristic of the Toro 69X series is its user-friendly design. Incorporating ergonomic features, such as comfortable seating and intuitive controls, the series prioritizes the operator's experience. The controls are strategically placed for easy access, reducing strain during long hours of operation. Furthermore, the models are equipped with advanced display systems, providing real-time data on machine performance and maintenance requirements, ensuring optimal operational efficiency.

The Toro 69X-02-XX, in particular, features all-wheel drive technology, providing exceptional traction and stability on uneven surfaces. This feature is ideal for residential properties with inclines or commercial landscaping projects that demand a reliable and agile machine. The all-wheel drive system allows for seamless transitions from flat to sloped areas, enhancing the overall performance and safety of the operation.

Safety is another critical aspect of the Toro 69X series design. Integrated safety features, such as roll-over protection systems and automatic shut-off mechanisms, ensure that both the operator and the machine are safeguarded during operation. This focus on safety aligns with Toro's commitment to delivering high-quality equipment that meets rigorous industry standards.

In summary, the Toro 69X series, with its distinctive models 69X-01-XX, 69X-02-XX, and 69X-06-XX, stands out for its powerful performance, innovative cutting technology, user-centric design, and safety features. These advanced landscaping solutions not only enhance productivity but also ensure an enjoyable and safe user experience, making them a reliable choice for professionals and landscaping enthusiasts alike.