English
Quick Installation Instructions
Four quick steps to install and get maximum performance from the Polaris 360:
• Install the Universal Wall Fitting (UWF) with Quick Disconnect and Eyeball Regulators
• Test and adjust water pressure
• Adjust feed hose to fit pool length
• Check for proper wheel RPM (revolutions per minute)
1 | Install the Universal Wall Fitting |
| |
| Installs in minutes on pools with a dedicated cleaner return line and a threaded |
| pipe fitting. |
| 1. Turn on the filtration pump and flush out the plumbing line.Turn pump off. |
| 2. Remove the UWF from the Quick Disconnect and screw it into the return opening. |
| 3. Turn the Quick Disconnect clockwise into the UWF and pull away to secure. |
| |
| Fitting in Pool Wall |
| Universal Wall |
| Fitting (UWF) |
| Filter Screen |
| Quick |
| Disconnect |
| Pressure |
| Relief Valve |
| Install Eyeball Regulators |
If the pool has more than one return line, install the Eyeball Regulators to ensure the pool’s water pressure is high enough to operate the Polaris 360.
|
| |
| ||
| Existing | |
| Eyeball Seat | |
| ||
Eyeball | ||
| Regulator | |
|
| |
Existing
Retainer Ring
Use the Replacement Eyeball with a Quick Disconnect fitting to restore proper water circulation when the Polaris 360 is removed from the pool.
Replacement Eyeball with quick connect fitting
If the Universal Wall Fitting and Eyeball Regulators are successfully installed, SKIP to Step 2. Otherwise, see Installing Other Pool Connections.
www.polarispool.com