Installing Other Pool Connections

Installing Other Pool Connections

If the pool does not have a dedicated return line, the Polaris 360 connects to most common return lines using special adapter kits available for purchase at a participating Polaris dealer.

For pools with plastic-pipe return lines (without pipe threads) that are cut off flush with the pool wall:

If pipe is 1" in diameter, use	If pipe is 1-1/4" in diameter, order 1" Stub
1" Stub Pipe Connection Kit	Pipe Connection Kit (part #9-100-8002)
(part #9-100-8002)	and 1-1/4" Sleeve Kit (part #8-841-00).

1"	Return Line	1-1/4" Return Line
1"	Return Line
		1-1/4" Sleeve
1" Expansion
Connector
		Not included with kit

If pipe is 1-1/2" in diameter, use 1-1/2" Stub Pipe Connection Kit (part #9-100-8003).

1-1/2" Return Line

1-1/2" Expansion Connector

For directional eyeball fittings that do not have a 1-1/2" threaded socket, request the Eyeball Adapter Connection Kit (part #9-100-8005).

Does current fitting look like this?

Wall Fitting

Adapter Retainer

Ring Connector

Head

These are the most common, but not all of the possible pool connections.

If the UWF and Eyeball Regulators still cannot be installed on the pool, contact your dealer or Customer Service to determine which parts may be necessary.

Other Connections Requiring Special Fittings

If a spa is connected to the pool filtration equipment, obtain expansion regulators in addition to one of the kits listed above. Contact your dealer or Customer Service to determine which parts may be necessary.

English