Crown Audio I-T9000 HD, I-T5000 HD, IT9000 HD, I-T12000 HD operation manual Adc Dsp Dac

Page 35

I-Tech HD Series Power Amplifiers

4 Advanced Operation

4.8.14 Amplifier Information

Information about the amplifi er is stored in the software system inventory and is displayed on the software control panels. Information includes manufacturer, model, date code, and serial number. The green items can’t be edited.

Channel Labels: Each amplifi er includes two labels that you may edit for your own use. Simply type in the text areas. Use these labels to describe the channels of your amplifi er. These names will appear in the individual processing blocks.

Attenuator Limits: This lets you set a limit on the attenuators. You can set the maximum attenuation from 0 dB to –100 dB. Once set, attenuation cannot be adjusted beyond this level.

NOTE: The attenuator setting must be below the attenuator limit that you are trying to set. For example, if the attenuator is set at –3 dB, you cannot set the attenuator limit below –3 dB unless you decrease the attenuator level.

Blackout Mode: This button lets you blackout the front panel display until you press a front-panel button or turn an Encoder. This feature turns off the LCD backlight and all front panel LEDs except for the fault LEDs and power- switch green LED. After blackout mode is enabled, an Encoder press/turn will “reactivate” the display. If no button is pressed/turned for over 5 seconds, the display will return to blackout mode.

4.8.15 Apply to Others

This screen lets you apply the System Architect settings for your I-Tech HD amplifi er to other I-Tech HD ampli- fi ers in the venue fi le.

4.8.16 Delay (Latency)

Due to the nature of DSP processing, there is some inherent delay or latency within the I-Tech’s DSP. These latencies are shown in Table 4 below:

Table 4. I-Tech HD latencies at two sample rates

Sample

ADC

DSP

DAC

Ampli-

Total

rate

 

 

 

fier

latency

 

 

 

 

 

 

48 kHz

250µs

666µs

196µs

54µs

1.166ms

 

 

 

 

 

 

96 kHz

94µs

333µs

48µs

54µs

529µs

 

 

 

 

 

 

These latencies do not include CobraNet Transport Latency and FIR Processing Latency.

Operation Manual

page 35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 140811-1 T5000 HDT9000 HD T12000 HD Some models may be exported under the name AmcronWichtige Sicherheitsinstruktionen Important Safety InstructionsEMC Standards Safety StandardEuropean Representative’s Name and Address Family Name I-Tech HDTable of Contents Welcome T5000HDT9000HD T12000HDMagnetic Field SetupUnpack and Install Your Amplifier You may also stack amps without using a cabinetWire Inputs and Outputs Wiring basics Connecting to AC MainsDistance Choose Input Wire and ConnectorsChoose Output Wire and Connectors Important Turn off the amplifier and unplug its power cord Stereo Mode WiringDisabled Bridge-Mono ModeProtecting Your Speakers Startup ProcedurePrecautions OperationFault Indicator Front Panel Controls and IndicatorsPower Switch USB 2.0 ConnectorDigital Inputs Section Back Panel Controls, Indicators and Connectors FansAnalog Inputs Section Outputs SectionAdvanced Operation PresetsExit Navigating the LCD Control Screen IntroductionMenu Tree NextOperation Examples 30.0 dBDB Mute Advanced Menu 96 kHz+15dBu Analog AnalogOFF dB OFF + +OFF v OFF Alert Menu Monitor Menu120 VAC 108.8 HrsNetworking Menu Networking MenuCobranet Menu Cobranet MenuDownloadable Presets Presets IntroductionUser Presets File Transfer Via the USB Port How to transfer a file from a USB flash drive to the amplifierThese messages may appear on the LCD screen List of Pop-Up Boxes and DescriptionsSelect Network Card Digital Audio Options AES/EBUNetworking the Amplifier Network TroubleshooterClip Indicator Output Signal Level Meter Amplifier ModeInput Level, Mute, Link, Level Meters, and Indicators Input Signal Level MeterDigital with Analog Override Input Signal RouterDigital with Analog Backup Analog Signal Detect Threshold -100 dB to 0 dBSource Configuration CobraNet Advanced SettingsInput Delay and Driver Delay Input Signal CompressorInput EQ and Output EQ Crossover Filters Transducer Thermal Limiting Average Power LimiterLevelMax Suite Peak Voltage LimiterContinuous Load Monitoring On Enables or disables the load-supervision functionADC DSP DAC Preset Manager Sine On/Off Turns the sine-wave generator on or off Signal GeneratorAES input Limiters Amplifier Cobranet input trim Fixed-Gain Mode in the I-Tech HDAmplifi er’s power switch is off TroubleshootingEthernet link is broken Speakers not connected Open circuit due to speaker failureHz 20 kHz with 0.35% THD SpecificationsDimensions Crosstalk below rated power, 20 Hz to 1 kHzCommon Mode Rejection CMR 20 Hz to 1 kHz AC Line ConnectorTypical Frequency Response 1W ChartsTypical Damping Factor vs. Frequency AC Power Draw and Thermal Dissipation 57.6 91.2 99.8 392 1338 337 Btu/hr Kcal/hr205 177 225 767 66063.6 103.3 111.8 441 1504 379 Per 1A Line Current212 183 213 726 625Advanced Features Network Addresses HiQnet NetworksHiQnet control offers many advantages IP Router 00-0A-40-00-DC-2F192.168.0.1 Bundles and Audio Channels Closer Look at CobraNetFast Ethernet 100Base-T Audio SpecsConductor Switched NetworksAppendix B Setting Sensitivity for Best Gain Staging Service Warranty Worldwide Except USA & Canada Items Excluded from this CROWN- WarrantyPurchase Date Crown Audio, IncFax Mishawaka RdThis page Intentionally Left Blank Crown Audio Factory Service Information

I-T9000 HD, I-T12000 HD, IT9000 HD, I-T5000 HD specifications

Crown Audio has established itself as a leader in the audio amplification industry, and its IT series, including the IT9000 HD, I-T9000 HD, I-T5000 HD, and I-T12000 HD, exemplifies this commitment to quality and innovation. These amplifiers are engineered to deliver exceptional audio performance, reliability, and user-friendly operation, making them ideal for a variety of applications, from concert sound to installed audio systems.

The IT9000 HD is a powerhouse that provides robust performance through its high-efficiency design. Featuring advanced Class I technology, it can deliver a staggering output of up to 9000 watts. This model is built with a lightweight, compact chassis that allows for easy installation and portability. The IT9000 HD incorporates Crown’s proprietary DriveCore technology, which combines the amplifier’s driver and output stage into a single chip, significantly increasing efficiency and reducing the overall size of the amplifier.

Next in line, the I-T9000 HD offers similar power output capabilities but adds flexibility with its network connectivity options. This model supports the latest in digital signal processing, allowing users to tailor their audio system with precision. It also features intelligent fan cooling technology that adjusts the fan speed based on heat generation, ensuring optimal performance under varying load conditions.

The I-T5000 HD stands out with its unique ability to deliver a maximum of 5000 watts, making it an ideal choice for smaller venues or mobile applications where power-to-weight ratio is critical. It shares many of the technological advancements of its larger counterparts, including enhanced DSP capabilities and comprehensive monitoring via onboard indicators and remote software control.

Lastly, the I-T12000 HD is the flagship model in this series, capable of an impressive 12000 watts output. It boasts advanced power management features and offers multiple operating modes, including stereo and bridged operation. The I-T12000 HD is designed for the most demanding applications, ensuring ultra-reliable performance and pristine sound quality in even the largest spaces.

All models in the Crown IT series feature a rugged construction for durability, along with intuitive front-panel controls for easy operation. They also include comprehensive network control options, allowing users to manage and monitor their systems remotely via DSI (Digital Signal Interface) and DSP capabilities.

In conclusion, Crown Audio's IT9000 HD, I-T9000 HD, I-T5000 HD, and I-T12000 HD amplifiers represent the pinnacle of amplifier technology, delivering unmatched performance, efficiency, and versatility for a wide range of audio applications. Whether for live events or permanent installations, these amplifiers provide the power and reliability necessary to meet the demands of modern audio environments.
Top Page Image Contents