Troubleshooting

PLEASE CHECK THE FOLLOWING BEFORE CALLING YOUR SERVICE CENTER

Before troubleshooting, the pool cleaner must be disconnected from the power supply and the power supply must be unplugged from the electrical outlet to prevent damage to the unit and possible personal injury.

1.Unit does not pump water or move:

a)Check to see if electric outlet has power.

b)Check if transformer is plugged into a grounded outlet and the cable assembly is plugged into the transformer.*

c)Switch the power supply “OFF” and “ON” a few times. Allow 45 seconds between “ON” and “OFF”.

d)Check for and remove any debris such as hair, string, or leaves that may be obstructing the free movement of the wheels.

2.Unit does not pump water at all, or pumps slowly but moves:

a)Check to see if propeller is seized due to accumulation of hair or debris on the propellers. Remove the top screw on the outlet top and clean the propeller. When reassembling the top cover, do not overtighten the screw.

b)Check to see if the filter canisters are thoroughly clean. Clean as necessary.

c)After following all of the above, if there is still a problem, visit global.irobot.com

3.Unit does not move but does pump water:

a)Check to see if forward/reverse motion is obstructed by foreign matter; hair, debris, etc. on wheels or there is an entanglement with the power cord.

b)Check there is no debris stuck inside the wheel between gears

c)Verify if the rolling brush is properly positioned and not broken.

The brush is transferring the rotation to the wheels and - if broken- the robot will not move properly.

d)After following all of the above, if there is still a problem, visit global.irobot.com

4.Unit does not climb the wall:

a)Check to see if the filter canisters are thoroughly clean. Clean as necessary.

5.Unit does not pick up dirt and debris:

a)Check 2a and 2b of this guide.

b)Extend the water intake (see page 6)

c)Check the Filter Intake Valve Flaps on the underside of your unit (see image below). The Flaps should move freely to open and close. Clean and free the Valve Flaps if necessary.

Filter Intake Valve Flaps

6.Unit does not seem to cover the entire pool:

a)Most likely a thorough cleaning of the filter is needed.

b)Verify that the unit rotates by 90 degrees on the first turn of a new cycle. If not - add or remove floats according to the instructions on page 7.

c)Check to see that the floating cable is properly spread out and is untangled.

d)Allow the unit to run in the pool for the entire cleaning cycle.

e)Check that the Motor is operating.

f)After following all of the above, if there is still a problem, visit global.irobot.com

7.Debris Comes Out Of The Unit When Removing It From Pool

a)Filter lock handle (Top Access Lid Does Not Close Properly) - Check that the Lock handle release mechanism is not damaged. The lid edges should be aligned with the unit’s body and the top filter is properly locked.

b)Intake Valves - Check that the Filter Intake Valve Flaps (see image above) move freely to open and close. Clean flaps if necessary.

global.irobot.com 13

530 specifications

The iRobot 530,500 is a remarkable robotic vacuum cleaner known for its intelligent features, user-friendly design, and efficient cleaning capabilities. One of the standout attributes of this model is its advanced navigation system, which employs a combination of sensors and algorithms to map and navigate various environments. This allows the vacuum to clean spaces effectively while avoiding obstacles and minimizing the chances of getting stuck.

Equipped with a HEPA filtration system, the iRobot 530,500 excels in trapping dust, allergens, and other particles, making it an excellent choice for allergy sufferers and households with pets. The washable filters are easy to maintain, ensuring that the vacuum operates at peak performance for extended periods. The device is designed with a low profile, enabling it to slide under furniture and reach difficult areas that traditional vacuums often skip.

Another prominent feature of the iRobot 530,500 is its powerful suction capability. The vacuum utilizes a unique cleaning system that combines both suction and brushing action, ensuring that debris is picked up effectively, even from carpets and rugs. The dual-mode virtual wall barrier technology is another innovative addition, allowing users to define specific areas that the vacuum should avoid, such as pet bowls or delicate items.

The iRobot 530,500 is compatible with the iRobot Home App, which enables users to schedule cleaning sessions, customize cleaning modes, and receive maintenance alerts directly from their smartphones. This level of connectivity ensures that users have full control over their cleaning routine, enhancing convenience and efficiency.

Additionally, the battery life of the iRobot 530,500 is impressive, providing up to 90 minutes of cleaning time on a single charge. When the battery runs low, the vacuum automatically returns to its docking station for recharging. This autonomous operation means that the iRobot 530,500 can fit seamlessly into busy households, providing hands-free cleaning.

In summary, the iRobot 530,500 stands out with its intelligent navigation, powerful cleaning capabilities, HEPA filtration, and smart connectivity. These features combine to create a robotic vacuum that effectively meets the demands of modern living, offering users a cleaner home with minimal effort.