iRobot 530 Registration and Warranty Components, National wiring rules electrical code

Page 2

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL THE INSTRUCTIONS

CAUTION: Do not plug the power supply into a grounded outlet or do not switch the pool cleaner “ON” if it is not fully immersed in water.

Operating the cleaner out of waterwill cause severe damage immediately and will result in loss of warranty.

Allow the cleaner to remain in the pool for 15 to 20 minutes following the end of its cleaning cycle. This will allow the motors to cool adequately. Do not leave the cleaner in the pool all the time. Always remember to turn the power supply “OFF” and unplug it from the power outlet before removing the cleaner from the pool.

WARNING: The cleaner must not be used when people are in the water. For use with swimming pool only.

Registration and Warranty

Please visit www.irobot.com/register to register your product and activate your warranty.

Components

While the appearance of your cleaner and some of its components may differ from those shown here, the function of the cleaner, operating procedures and maintenance practices are the same.

Safety Note

• The unit must be supplied through a residual current device (RCD or GFCI) having

a rated residual operating current not exceeding 30 mA

• The connection to the branch circuit should be consistent with the local and

1

2

national wiring rules (electrical code).

• Mishandling of the unit can result in leakage of lubricants.

• If the supply cord is damaged, it must be replaced by the manufacturer’s

service agent or a qualified and trained person in order to avoid hazards.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

WARNING: A Ground Fault Current Interrupter (GFCI-USA) or a Residual Current Device (RCD-EUROPE) must be installed to protect your electric outlet and preventany possible electric shock.

SAVE THESE INSTRUCTIONS

Please read this manual completely before operating your pool cleaner.

3 4 5

6

7

8

9

Your new automatic pool cleaner contains:

The robotic pool cleaner with its floating cable.

The Power Supply (transformer).

1)Handle

2)Cable

3)Outlet Top

4)Filter Access

5)Filter Lock Lever

6)Wheels

7)Unit Body

8)Intake Valves

9)Rolling Brush

2iRobot Mirra 500 Series Owner’s Manual

Image 2
Contents Mirra Rated residual operating current not exceeding 30 mA Registration and Warranty ComponentsNational wiring rules electrical code Mishandling of the unit can result in leakage of lubricantsWelcome Table of Contents Getting Started Maintenance and Adjustment Intake valves adjustmentFloat Installation Cleaning the Filter Changing the Rolling BrushAccessing and Cleaning the Propeller Operating Your Pool Cleaner Set Up Operating Your Pool Cleaner Plugging the Cable Plug TypeClean the propeller once a month Operating Your Pool Cleaner Power ButtonPower LED Troubleshooting Unit does not pump water at all, or pumps slowly but movesGrounding Power SupplyMaintenance and safety Environmental conditionsDeclaration of Conformity Test StandardsIRobot Customer Care USA
Related manuals
Manual 36 pages 40.53 Kb Manual 14 pages 45.44 Kb

530 specifications

The iRobot 530,500 is a remarkable robotic vacuum cleaner known for its intelligent features, user-friendly design, and efficient cleaning capabilities. One of the standout attributes of this model is its advanced navigation system, which employs a combination of sensors and algorithms to map and navigate various environments. This allows the vacuum to clean spaces effectively while avoiding obstacles and minimizing the chances of getting stuck.

Equipped with a HEPA filtration system, the iRobot 530,500 excels in trapping dust, allergens, and other particles, making it an excellent choice for allergy sufferers and households with pets. The washable filters are easy to maintain, ensuring that the vacuum operates at peak performance for extended periods. The device is designed with a low profile, enabling it to slide under furniture and reach difficult areas that traditional vacuums often skip.

Another prominent feature of the iRobot 530,500 is its powerful suction capability. The vacuum utilizes a unique cleaning system that combines both suction and brushing action, ensuring that debris is picked up effectively, even from carpets and rugs. The dual-mode virtual wall barrier technology is another innovative addition, allowing users to define specific areas that the vacuum should avoid, such as pet bowls or delicate items.

The iRobot 530,500 is compatible with the iRobot Home App, which enables users to schedule cleaning sessions, customize cleaning modes, and receive maintenance alerts directly from their smartphones. This level of connectivity ensures that users have full control over their cleaning routine, enhancing convenience and efficiency.

Additionally, the battery life of the iRobot 530,500 is impressive, providing up to 90 minutes of cleaning time on a single charge. When the battery runs low, the vacuum automatically returns to its docking station for recharging. This autonomous operation means that the iRobot 530,500 can fit seamlessly into busy households, providing hands-free cleaning.

In summary, the iRobot 530,500 stands out with its intelligent navigation, powerful cleaning capabilities, HEPA filtration, and smart connectivity. These features combine to create a robotic vacuum that effectively meets the demands of modern living, offering users a cleaner home with minimal effort.