Safety Signs

SAFETY INFORMATION (continued)

Never operate broadcast spreader if anyone is within 50 ft. of ATV and spreader.

Never use your hand or fingers to clear a jam of material in the feed gate. Use a clean stick or rod.

When spreading any material, always use safety goggles or safety glasses with side shields.

When spreading, always be aware of the wind direction and that it may carry the material further than normal spread width.

Use care when working on slopes.

Do not allow tools to cause sparks when working on a battery. BATTERIES PRODUCE EXPLOSIVE HYDROGEN GAS. A spark could cause an explosion if hydrogen gas is present.

Observe correct polarity (+ and –) on batteries.

Disconnect negative (–) cable first and connect it last.

Avoid excessive speed during operation. Use lower gear to slow forward travel.

Always shut off ATV and shift to “Park” or set brakes when leaving tractor. Remove key when leaving ATV unattended.

Before operating equipment: if you have any questions regarding the proper assembly or operation, contact your dealer or representative.

		This SAFETY SIGN is located on the seeder.
	WARNING	OBEY ALL SAFETY WARNINGS!
	Stay clear while	NOTE:
	spinner is turning	NOTE:
	spinner is turning	If Safety Sign is missing or damaged,
	101122	replace immediately.
		replace immediately.