3M™ Multi-touch Display M2256PW User Guide | 5 |
CHAPTER 1
Introduction
Overview
Congratulations on the purchase of your 3M™ Multi-touch Display M2256PW. This guide describes how to set up your M2256PW Multi-touch Display.
The M2256PW Multi-touch Display is a 22” LCD with 16:10 aspect ratio with an attached desktop stand. 3M Multi-touch Technology, based on 3M Projected Capacitive touch technology and electronics, offers fast, accurate and simultaneous 20-finger touch functionality for next-generation, multitouch applications.
This display provides true multi-touch functionality supporting up to 20 independent touches as well as traditional pinch, expand and rotate features. Each touch is independently recognized thereby supporting true multi-touch and multi-user input.
The M2256PW Multi-touch Display uses projected capacitive technology with an all glass front surface and provides multi-touch functionality in a highly durable form factor. The fast response rate enables the creation of multitouch applications and supports real time rendering of maps and other speed sensitive applications.
Important Safety Information
Read and understand all safety information before using this product. Follow all instructions marked on the product and described in this document. Pay close attention to the following installation warnings and safety precautions.
Intended Use
The 3M Multi-touch Display M2256PW was designed for touch input and tested to replace an existing display. These displays are intended for indoor use only and are not designed for use in hazardous locations.
3M Touch Systems, Inc. Proprietary Information – 37531 Rev D
