DeVillbiss Air Power Company D25572 warranty For GBE4010 and GBFE6010

Page 10

FOR GBE4010 AND GBFE6010

5.Remove the nut from the solenoid post with the panel assembly wire harness. Place one end of the posi- tive (red) battery cable onto this post with the panel assembly wire. Reassemble nut and tighten securely. See Figure 4.

FOR GBV7000, GBV7010,

GBVE8000

5.Remove the nut from the solenoid post and place one end of the posi- tive (red) battery cable onto the post. Reassemble nut and tighten securely. See Figures 5.

Lawn & Garden batteries can come in

two terminal configurations. The Positive (+) and Negative (-) terminals can be oriented so that they are +/- or -/+. See Figure 6. In the unlikely event that the battery terminals are un- marked, we recommend that you return the battery to the retailer for exchange for a properly marked battery or let an authorized service center install the battery for you. Failure to connect the battery properly can possibly cause bodily injury. In addition, extensive engine electrical damage not covered under warranty can result.

6.Attach the other end of the positive (red) battery cable to the positive (+) terminal on the battery.

To Prevent sparks connect the red

(positive) cable to the positive (+) terminal before connecting the black negative cable.

7.Attach one end of the negative (black) cable to the negative (-) terminal on the battery.

8.Attach the other end of the negative (black) cable to the frame as shown. Install the star washer be- tween the cable and the frame. See Figure 7.

Solenoid

Panel

Assembly

Wire

Harness

Figure 4

Nuts Positive (+)

Battery Cable

Solenoid

Figure 5

Figure 6

IMPORTANT: See Figure 6 caution before connecting cable to battery.

Negative (-)

Battery Cable

Star Washer

(-) Negative Battery Cable Connection

Figure 7

D25572

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Generator Consumer General and Service Information Consumer Safety InformationWhen installing a Double Safety Guidelines / DefinitionsImportant Safety Instructions Risk of Electrocution and FireOperation When damagedRisk of Electrocution and Fire Generator in rainUnit Indoors or in ANY Risk of FireConfined Area Risk of Breathing Inhalation Hazard Risk of Unsafe OperationRisk of HOT Surfaces Risk of Moving Parts Risk from LiftingRemove Generator from Carton AssemblyTypical Installation of Battery Grounding the GeneratorFor GBE4010 and GBFE6010 Obtaining Electricity from the Generator Double Throw Transfer SwitchExtension Cords Operation To Start the Engine Recoil start/Pull startConnecting Electrical Loads Stopping EngineCustomer Responsibilities Table MaintenanceEngine Maintenance General RecommendationsEngine Preparation Generator MaintenanceStorage GeneratorDetermining Wattage Requirements Battery Electric Start Units onlyWattage Calculations Starting WattsApplication Guide Starting Wattage RequirementsHousehold Wattage Calculator Appliance or Load Device Typical Device Wattage TotalTroubleshooting Guide StartLimited Warranty Responsibility of Original Purchaser initial UserQuick Facts Call 1-800-888-2468 EXT

D25572 specifications

DeVilbiss Air Power Company D25572 is a powerful air compressor that embodies cutting-edge technology and robust design, making it an invaluable asset for both professional and amateur users. Renowned for its reliability and performance, the D25572 is widely used in a variety of applications such as automotive tasks, woodworking, and home improvement projects.

One of the standout features of the D25572 is its impressive 6-gallon tank capacity, which allows it to store a substantial amount of compressed air and deliver consistent output without frequent cycling. This is particularly beneficial for users who require extended use of pneumatic tools, ensuring that they can complete tasks efficiently without interruptions for refilling.

Another key characteristic of the D25572 is its powerful 1.5-horsepower motor, which is designed to provide high airflow rates. This motor operates quietly and efficiently, reducing noise levels while still delivering sufficient power to meet demanding workloads. With a maximum pressure of up to 125 PSI, it can easily handle various tasks, from inflating tires to powering air tools.

The design of the D25572 emphasizes user-friendliness and portability. It features a compact, lightweight structure that makes it easy to transport from one job site to another. Additionally, the built-in handle enhances maneuverability, allowing users to move the unit without hassle. The unit also includes rubber feet, providing stability during operation and minimizing vibration.

Moreover, the D25572 incorporates several advanced technologies that enhance its functionality. The oil-free pump design eliminates the need for regular maintenance, making it an ideal choice for users seeking a low-maintenance solution. This feature not only saves time but also contributes to the overall durability of the unit.

The D25572 is equipped with multiple output ports, allowing for the simultaneous use of several air tools. This feature is especially useful for professionals who require versatility in their equipment. The compressor also comes with easy-to-read gauges, enabling users to monitor pressure levels accurately and make adjustments as needed.

In conclusion, the DeVilbiss Air Power Company D25572 air compressor combines efficiency, portability, and advanced technology, making it a top choice for various air-powered applications. Its robust features and user-centric design ensure that it meets the needs of both casual and professional users effectively.
Top Page Image Contents