Portability KIT Installation, Locking Handle

PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: Hammer, 1/2” wrench, ratchet with a 1/2” socket, and wood blocks.

Refer to the drawing for proper alignment of Foot bracket and Wheel brackets.

Refer to the parts list on pages 15 and 16.

Wheel Bracket & Wheel Installation

1.Block up end of generator, about 8” high, opposite the fuel tank cap to install wheels and wheel bracket assy.

2.Add 5/16 washer (item 29) to the 1 3/4” bolts (item 71) and insert bolts/washers through the holes located in the base pan of the carrier.

3.Place the wheel bracket (item 65) through the bolts and add a 5/16 nyloc nut (item 27) and tighten securely. (On the bottom side of the pan in-between the holes will be a 1” square brace, the wheel bracket will set on this brace).

4.Add wheel spacer (item 70) to the axle.

5.Slide the wheel (item 64) onto the axle until it is snug against the spacer. The wheel is on correctly if there is approximately a 1/2” gap between the carrier tubing and the side of the wheel. If it is less then 1/2” from the carrier, turn the wheel over and reinstall. Align the wheels parallel to the carrier tubing and tighten nuts securly. To align correctly, the bolts holding the wheel bracket may have to be loosened.

6.With a hammer, add the plastic cap (item 69) on end of axle.

7.Repeat above instructions for the remaining wheel.

Foot bracket Installation

1.Block up opposite end of the unit, about 8” high.

2.Add 5/16 washer (item 29) to 1” bolts (item 30) and place through holes in the base pan.

3.Add foot bracket assembly (item 66) to bolts, add 5/16 nyloc nuts (item 27) and tighten securely.

4.Add support bracket (item 68) from foot bracket to the base pan. Secure in place with 1” bolts (item 30), washers (item 29) and 5/16 nyloc nuts (item 27).

Locking Handle
Locking Handle		1	2
1.	Attach the lanyards (item 72) to the release	1	2
1.	Attach the lanyards (item 72) to the release
	pins (item 73) and carrier as shown in the
2.	illustration.
2.	To lock the handle in the extended position,
	align the holes in the handle brackets with the
	holes in the carrier brackets and insert the
	release pins.

4		English
4		English

PMC601100 specifications

The Powermate PMC601100 is a versatile and powerful generator that caters to the diverse needs of users seeking backup power solutions for both residential and commercial applications. This impressive unit is engineered for reliability and convenience, making it a popular choice among homeowners, contractors, and outdoor enthusiasts alike.

One of the standout features of the PMC601100 is its robust 6,000 watts peak output, which provides ample power for essential household appliances during outages, as well as tools and equipment for job sites. The generator is equipped with a 301cc engine that delivers efficient fuel consumption while ensuring a long runtime, making it perfect for extended use.

The PMC601100 showcases a range of advanced technologies designed to enhance user experience and operational performance. The generator features a digital control panel that simplifies monitoring and management of power output and engine status. This panel includes essential elements like a voltmeter, circuit breaker, and low oil shutdown indicator, ensuring users are always aware of the generator's performance.

Mobility and transportability are crucial characteristics of the Powermate PMC601100. It comes with large, sturdy wheels and a collapsible handle, making it easy to move around and store. This portability factor is particularly appealing for those who require power in various locations, whether it be for camping trips, tailgating, or emergency situations at home.

In terms of noise output, the PMC601100 is designed with operational quietness in mind. Its low noise level ensures that it can run in residential areas without causing disturbances, making it suitable for use during nighttime hours when power outages occur. This feature is essential for maintaining a harmonious environment while still providing the necessary power backup.

Additionally, the Powermate PMC601100 generator is built with durability in mind. Constructed with high-quality materials, it is designed to withstand the rigors of regular use, both in outdoor conditions and rough environments. The generator is also equipped with a durable frame that protects vital components from damage.

Overall, the Powermate PMC601100 generator excels at meeting the power demands of both casual users and those who rely on consistent, dependable energy sources. With its impressive power output, advanced technology, and user-friendly features, the PMC601100 stands out as a prime choice for anyone looking for a reliable portable generator solution.