Electric Start Wiring, DC Features | Powermate PM0601250 specs

ELECTRIC START WIRING

The generator is equipped with electric start. An “Off-On- Start” rotary key switch is provided on the recoil end panel. All necessary wiring is provided. The battery is provided. See engine manual for wiring diagram (3A Charge Coil), and additional information.

Note that the battery must be connected in order for this engine to run. The 12V fuel solenoid must be engaged in order for fuel to reach the carburetor. This fuel solenoid also helps prevent engine backfire. This engine is not equipped with recoil start.

DC FEATURES

The charging system of the unit is supplied by the starter/alternator of the engine. 12 volts DC is constantly charging the battery when the unit is running . Disconnecting the battery will stop the charging of the battery.

Before charging a storage battery, check the electrolyte fluid level in all the cells. (Sealed batteries do not require checking). Add distilled water to each cell if necessary, to bring the level back up to the manufacturer’s required level.

WARNING: Storage batteries give off EXPLOSIVE hydrogen gas while charging. Do not allow smoking, open flames, sparks, or spark producing equipment in the area while charging.

WARNING: Battery electrolyte fluid is comprised of sulfuric acid that can be very dangerous and cause severe burns. Do not allow this fluid to contact eyes, skin, clothing, etc. If contact or spillage does occur, flush the area with water immediately.

CAUTION: This battery charging system is intended to recharge weak batteries, not to "boost start" vehicles. Do not overcharge battery or leave battery unattended.

CAUTION: Do not continue to charge a battery that becomes hot or is fully charged.

BATTERY INSTALLATION

Powermate Corporation recommends a 12 V battery with at least 235 cranking amps, Model U1L, Lawn and Garden Battery.

1.Place the battery in the position provided.

2.Place the bolts through the holes on the battery pan.

3.Place the bolts through the loops on the Hold-Down bracket.

4.Place the spacers and washers on the bolts.

5.Tighten down the Hold-Down assembly with the 1/4-20 nuts provided.

Note: Spacers may be removed depending on the battery height.

WARNING: Batteries contain sulfuric acid (when filled). May contain explosive gasses. Always abide by safety warnings provided with the battery.

-Keep sparks, flame and cigarettes away.

-Hydrogen gas is generated during charging and discharging.

-Always shield eyes, protect skin and clothing when working near batteries.

Connect the red 8 ga. battery lead to the positive (+) battery post and the black 8 ga. battery to the negative (-) battery post with the bolts and nuts provided.

BATTERY KIT PARTS LIST

Item	Description	Qty.
A.	*Bolt, 1/4-20 X 8”	2
B.	*Washer 1/4	2
C.	*Spacer	2
D.	Hold Down bar (P/N 0036525.02)	1
E.	*Nyloc nut, 1/4-20	2

*These are standard parts available at your local hardware store.


English		3

PM0601250 specifications

The Powermate PM0601250 is a versatile and efficient generator that caters to a variety of power needs. This portable generator is known for its reliability, making it an ideal choice for both home backup power and recreational activities such as camping or tailgating. With a combination of advanced technologies and practical features, the PM0601250 stands out as a powerful solution for electricity needs when conventional power sources are unavailable.

One of the most notable features of the Powermate PM0601250 is its impressive power output. Capable of delivering a maximum of 6,250 starting watts and 5,000 running watts, this generator is well-equipped to handle a range of appliances and tools, from refrigerators and air conditioners to power tools and lighting during outdoor events. This robust performance ensures that users can rely on the PM0601250 for essential power during emergencies or while enjoying outdoor adventures.

The generator is powered by a dependable 389cc OHV engine, designed for durability and fuel efficiency. This engine provides a quiet operation, allowing users to enjoy their activities without the disruptive noise often associated with generators. Additionally, the efficient fuel consumption enhances its usability in various scenarios, extending the run time between refueling.

Portability is another significant aspect of the Powermate PM0601250. The generator is equipped with solid, never-flat wheels that make it easy to transport over different terrains. The foldable handle adds to its convenience, enabling users to compactly store the unit or move it easily from one location to another, whether in a backyard, at a campsite, or on a job site.

Safety features are paramount in the design of the PM0601250. With a low oil shutdown feature, the generator automatically powers off to prevent engine damage, offering peace of mind to users. The durable steel frame provides sturdy protection while ensuring longevity and resilience in various conditions.

In terms of connectivity, the Powermate PM0601250 offers multiple outlets, including 120V household outlets and a 12V DC outlet, allowing users to power multiple devices simultaneously. This versatility makes it suitable for a wide range of applications, from home backup to outdoor use.

Overall, the Powermate PM0601250 stands as a reliable, powerful, and portable generator that meets the needs of diverse users. Its robust engine, efficient fuel consumption, portability, and safety features make it an excellent choice for anyone seeking a dependable source of power in various situations. Whether for emergency backup or recreational use, the PM0601250 is designed to deliver performance and convenience.