Portability KIT Installation, Locking Handle

PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: Hammer, 1/2” wrench, ratchet with a 1/2” socket, and wood blocks.

Refer to the drawing for proper alignment of Foot bracket and Wheel brackets.

Refer to the parts list on pages 15 and 16.

Wheel Bracket & Wheel Installation

1.Block up end of generator, about 8” high, opposite the fuel tank cap to install wheels and wheel bracket assy.

2.Add 5/16 washer (item 29) to the 1 3/4” bolts (item 71) and insert bolts/washers through the holes located in the base pan of the carrier.

3.Place the wheel bracket (item 65) through the bolts and add a 5/16 nyloc nut (item 27) and tighten securely. (On the bottom side of the pan in-between the holes will be a 1” square brace, the wheel bracket will set on this brace).

4.Add wheel spacer (item 70) to the axle.

5.Slide the wheel (item 64) onto the axle until it is snug against the spacer. The wheel is on correctly if there is approximately a 1/2” gap between the carrier tubing and the side of the wheel. If it is less then 1/2” from the carrier, turn the wheel over and reinstall. Align the wheels parallel to the carrier tubing and tighten nuts securly. To align correctly, the bolts holding the wheel bracket may have to be loosened.

6.With a hammer, add the plastic cap (item 69) on end of axle.

7.Repeat above instructions for the remaining wheel.

Foot bracket Installation

1.Block up opposite end of the unit, about 8” high.

2.Add 5/16 washer (item 29) to 1” bolts (item 30) and place through holes in the base pan.

3.Add foot bracket assembly (item 66) to bolts, add 5/16 nyloc nuts (item 27) and tighten securely.

4.Add support bracket (item 68) from foot bracket to the base pan. Secure in place with 1” bolts (item 30), washers (item 29) and 5/16 nyloc nuts (item 27).

Locking Handle
		1
1.	Attach the lanyards (item 72) to the release	1			2
1.	Attach the lanyards (item 72) to the release
	pins (item 73) and carrier as shown in the
2.	illustration.
	To lock the handle in the extended position,
	To lock the handle in the extended position,		72
	align the holes in the handle brackets with the
	align the holes in the handle brackets with the			73
	holes in the carrier brackets and insert the
	holes in the carrier brackets and insert the

release pins.

4		English
4		English

PM0601250 specifications

The Powermate PM0601250 is a versatile and efficient generator that caters to a variety of power needs. This portable generator is known for its reliability, making it an ideal choice for both home backup power and recreational activities such as camping or tailgating. With a combination of advanced technologies and practical features, the PM0601250 stands out as a powerful solution for electricity needs when conventional power sources are unavailable.

One of the most notable features of the Powermate PM0601250 is its impressive power output. Capable of delivering a maximum of 6,250 starting watts and 5,000 running watts, this generator is well-equipped to handle a range of appliances and tools, from refrigerators and air conditioners to power tools and lighting during outdoor events. This robust performance ensures that users can rely on the PM0601250 for essential power during emergencies or while enjoying outdoor adventures.

The generator is powered by a dependable 389cc OHV engine, designed for durability and fuel efficiency. This engine provides a quiet operation, allowing users to enjoy their activities without the disruptive noise often associated with generators. Additionally, the efficient fuel consumption enhances its usability in various scenarios, extending the run time between refueling.

Portability is another significant aspect of the Powermate PM0601250. The generator is equipped with solid, never-flat wheels that make it easy to transport over different terrains. The foldable handle adds to its convenience, enabling users to compactly store the unit or move it easily from one location to another, whether in a backyard, at a campsite, or on a job site.

Safety features are paramount in the design of the PM0601250. With a low oil shutdown feature, the generator automatically powers off to prevent engine damage, offering peace of mind to users. The durable steel frame provides sturdy protection while ensuring longevity and resilience in various conditions.

In terms of connectivity, the Powermate PM0601250 offers multiple outlets, including 120V household outlets and a 12V DC outlet, allowing users to power multiple devices simultaneously. This versatility makes it suitable for a wide range of applications, from home backup to outdoor use.

Overall, the Powermate PM0601250 stands as a reliable, powerful, and portable generator that meets the needs of diverse users. Its robust engine, efficient fuel consumption, portability, and safety features make it an excellent choice for anyone seeking a dependable source of power in various situations. Whether for emergency backup or recreational use, the PM0601250 is designed to deliver performance and convenience.