Powermate PM0601101 manual Portability KIT Installation, Foot bracket Installation, Locking Handle

Page 4

PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: Hammer, 1/2” wrench, ratchet with a 1/2” socket, and wood blocks.

Refer to the drawing for proper alignment of Foot bracket and Wheel brackets.

Refer to the parts list on pages 15 and 16.

Wheel Bracket & Wheel Installation

1.Block up end of generator, about 8” high, opposite the fuel tank cap to install wheels and wheel bracket assy.

2.Add 5/16 washer (item 29) to the 1 3/4” bolts (item 71) and insert bolts/washers through the holes located in the base pan of the carrier.

3.Place the wheel bracket (item 65) through the bolts and add a 5/16 nyloc nut (item 27) and tighten securely. (On the bottom side of the pan in-between the holes will be a 1” square brace, the wheel bracket will set on this brace).

4.Add wheel spacer (item 70) to the axle.

5.Slide the wheel (item 64) onto the axle until it is snug against the spacer. The wheel is on correctly if there is approximately a 1/2” gap between the carrier tubing and the side of the wheel. If it is less then 1/2” from the carrier, turn the wheel over and reinstall. Align the wheels parallel to the carrier tubing and tighten nuts securly. To align correctly, the bolts holding the wheel bracket may have to be loosened.

6.With a hammer, add the plastic cap (item 69) on end of axle.

7.Repeat above instructions for the remaining wheel.

Foot bracket Installation

1.Block up opposite end of the unit, about 8” high.

2.Add 5/16 washer (item 29) to 1” bolts (item 30) and place through holes in the base pan.

3.Add foot bracket assembly (item 66) to bolts, add 5/16 nyloc nuts (item 27) and tighten securely.

4.Add support bracket (item 68) from foot bracket to the base pan. Secure in place with 1” bolts (item 30), washers (item 29) and 5/16 nyloc nuts (item 27).

Locking Handle

 

 

 

 

 

 

 

 

1

 

 

 

2

 

1.

Attach the lanyards (item 72) to the release

 

 

 

 

 

 

 

 

 

 

 

 

 

pins (item 73) and carrier as shown in the

 

 

 

 

 

 

 

2.

illustration.

 

 

 

 

 

 

 

To lock the handle in the extended position,

 

 

 

 

 

 

 

 

align the holes in the handle brackets with the

 

 

 

 

 

 

 

 

holes in the carrier brackets and insert the

 

 

 

 

 

 

 

 

release pins.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

English

 

 

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PM0601101 Power Cord Connections Major Generator FeaturesControl Panel Electric Start Wiring DC FeaturesBattery Installation Battery KIT Parts ListFoot bracket Installation Portability KIT InstallationLocking Handle Limited Warranty Not CoveredCaractéristiques Principales DU Groupe Electrogene Tableau DE CommandeConnexions DU Cordon ’ALIMENTATION Installation DE LA Batterie Câblage DU Démarreur ÉlectriqueCaractéristiques DE CC Liste DES Pièces DE LA Trousse DE BatteriesInstallation de la ferrure de pied Linstallation DE KIT DE TransportPoignee Verrrouillant Garantie Limitée Ce qui nest pas couvertCaracteristicas Principales DEL Generador Panel DE ControlConexiones DEL Cable Cableado DE Arranque Electrico Características CCInstalación DE LA Batería Lista DE Partes Para EL Equipo DE BateráInstalación de la ménsula de pie Instalacion DEL Juego DE TransportConecte los acoladores artículo 72 a los Garantia Limitada No están cubiertosParts Drawing / Schema DES Pièces / Diagrama DE Piezas PM0601101Parts List / Liste DES Pièces / Lista DE Piezas Part Description DescripciónParts List / Liste DES Pièces / Lista DE Piezas

PM0601101 specifications

The Powermate PM0601101 is a versatile and efficient portable generator that is designed for both recreational and emergency use. This generator is particularly appealing for those who require reliable power on the go, whether it be for camping trips, tailgating, or providing backup power during outages.

One of the standout features of the Powermate PM0601101 is its robust, air-cooled, four-stroke engine, which delivers a maximum output of 6000 watts and a rated output of 5500 watts. This powerful engine is engineered to provide consistent and dependable power, ensuring that users have access to electricity when they need it most. Additionally, the generator features a recoil start system that allows for easy operation, making it accessible for users of all experience levels.

This generator is built with mobility in mind. It is equipped with sturdy wheels and a foldable handle, making it easy to transport to various locations. Its compact design allows for convenient storage, and with a weight that is manageable, users can effortlessly move it from their garage to their outdoor adventures or to the worksite.

The Powermate PM0601101 comes with multiple outlets, including 120V household outlets and a 120V RV outlet, allowing users to connect a variety of devices simultaneously. This versatile outlet configuration is perfect for powering tools, appliances, and electronic devices, making it multifunctional for different scenarios.

In terms of durability, the PM0601101 features a rugged steel frame that helps to protect the internal components from damage during transport or use in harsh conditions. Its fuel tank has a capacity of 5.5 gallons, which provides an impressive runtime, allowing users to operate the generator for extended periods without frequent refueling.

Safety is also a key consideration in the design of the Powermate PM0601101. It is equipped with multiple safety features, including a low oil shutdown system, which automatically turns off the engine when oil levels are low, preventing damage and prolonging the longevity of the generator.

In conclusion, the Powermate PM0601101 offers a reliable and powerful solution for those in need of portable electricity. With its impressive output, user-friendly features, and thoughtful design, this generator is well-suited for a range of applications, making it a valuable addition for outdoor enthusiasts and homeowners alike.
Top Page Image Contents