Creating a Temporary Shelter

7500EXL Extended Life Generator

1.In an emergency, use the original shipping carton.

2.Cut off top carton flaps and one long side of carton to expose muffler side of unit. If required, tape up other sides of carton to fit over generator as shown in Figure 9.

Figure 9 — Permanent Cold Weather Shelter

Wind

NOTE: If required, remove wheel kit to fit carton over generator as shown in Figure 9.

3.Cut appropriate slots to access receptacles of unit.

6.Start generator as described in the section “Starting the Engine”, then place carton over generator. Keep at least 5 ft. (152 cm) clearance on all sides of generator including overhead with shelter in place.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot surfaces and avoid hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 ft. (152 cm) clearance on all sides of generator including overhead.

•Remove shelter when temperatures are above 40°F [4°C].

7.Remove shelter when temperatures are above 40°F [4°C].

8.Turn engine OFF and let cool two (2) minutes before refueling.Wipe up any spilled fuel.

4.Face exposed end away from wind and elements.

5.Locate generator as described in the section “Generator Location”. Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

WARNING

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide can cause nausea, fainting or death.

•Operate generator ONLY outdoors.

•Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

•DO NOT operate generator inside any building or enclosure (even if doors or windows are open), including the generator compartment of a recreational vehicle (RV).

Creating a Permanent Shelter

1.Build a structure that will enclose three sides and the top of the generator, making sure muffler side of generator is exposed.

NOTE: Structure should hold enough heat created by the generator to prevent icing problem.

2.DO NOT enclose generator any more than shown in Figure 9.

NOTE: If a wheel kit is installed on the generator, enlarge shelter accordingly.

3.Follow steps 3 through 8 as described previously in “Creating a Temporary Shelter”.

101 9-3 specifications

The Generac 101 9-3 is a cutting-edge power generation solution designed to meet the diverse needs of both residential and commercial users. Renowned for its robust construction and innovative technologies, this unit stands out in the competitive market of backup generators.

At the heart of the Generac 101 9-3 is its powerful engine, capable of delivering reliable performance in any situation. This generator boasts a high-output capacity, ensuring that it can handle multiple appliances simultaneously during outages. It is particularly well-suited for larger homes and businesses that depend on a steady power supply for critical operations.

One of the main features of the Generac 101 9-3 is its automatic transfer switch (ATS). This technology allows the generator to detect power outages and switch on automatically, ensuring minimal disruption. The ATS guarantees that the transition from grid power to generator power is seamless and instantaneous, providing peace of mind for users.

The unit also showcases a user-friendly control panel with intuitive interfaces, making it easy to monitor performance and adjust settings. Generac has integrated advanced monitoring capabilities, allowing users to track fuel levels, power output, and maintenance schedules. This feature enhances the convenience of ownership and prolongs the lifespan of the generator.

Another remarkable characteristic of the Generac 101 9-3 is its emissions control technology. Designed to meet stringent environmental regulations, this generator operates efficiently while minimizing its carbon footprint. The low-emission engine is a testament to Generac’s commitment to sustainable energy solutions.

In terms of durability, the Generac 101 9-3 is built to withstand harsh weather conditions. Housed in a weatherproof enclosure, it is protected from rain, snow, and extreme temperatures, ensuring reliability in any climate. Its heavy-duty construction provides the longevity needed for prolonged use, making it a worthwhile investment.

Additionally, the Generac 101 9-3 is designed with serviceability in mind. It comes equipped with easily accessible components, simplifying maintenance and repair tasks. This thoughtful design feature helps reduce downtime and keeps the generator running at peak performance.

In conclusion, the Generac 101 9-3 is a high-performance generator that combines power, efficiency, and durability. Its automatic transfer switch, advanced monitoring, emissions control technology, and user-friendly design make it an excellent choice for anyone in need of a reliable power backup solution. Whether for home or business use, the Generac 101 9-3 stands ready to deliver dependable energy when it’s needed most.