Generac 101 9-3 operating instructions Check Battery / Attach Negative Battery Wire, To install

Page 7

7500EXL Extended Life Generator

2.Slide axle through both mounting brackets.

3.Slide a wheel over the axle.

NOTE: Be sure to install both wheels with the air pressure valve on the outboard side.

4.Place a washer on axle and then place an e-ring in axle groove.

5.Install e-ring with pliers, squeezing from top of e-ring to bottom of axle.

CAUTION

E-rings can cause eye injury.

E-rings can spring back and become airborne when installing or removing.

• Always wear eye protection when installing/removing e-rings.

6.Repeat step 3 thru 5 to secure second wheel.

7.Tip generator so that engine side is down.

8.Attach the vibration mounts to the support leg with 1/4-20 x 1” capscrews and 1/4-20 lock nuts.

9.Line up holes in support leg with holes in generator frame.

10.Attach support leg using 2 capscrews (M8 x 20 mm) and 2 hex nuts (M8).Tighten with a 1/2” or 13mm socket wrench and 1/2” or 13mm wrench.

11.Return generator to normal operating position (resting on wheels and support leg).

12.Check each fastener to ensure it is secure.

Check Battery / Attach Negative Battery Wire

The sealed battery on the generator is fully charged and pre–installed except for the negative (black) battery cable.

To install:

1.Cut off tie wrap securing loose end of negative (black) cable.

2.Remove screw, lock washer and flat washer on negative battery terminal.

3.Slide lock washer, flat washer and negative battery cable over screw (Figure 2).

Figure 2 — Negative Battery Connection

Negative

Battery Cable

Screw

Flat Washer

Lock Washer

Positive

Battery Cable

4.Reattach screw to negative battery terminal and tighten.

5.Verify that connections to battery and generator are tight and secure.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Call Generac Generator Helpline 1-800-270-1408 M-F8-5 CT Operator’s ManualSafety Rules Table of ContentsEquipment Description Generator produces powerful voltage Unintentional sparking can result in fire or electric shock Know Your Generator Unpack the Generator AssemblyCarton Contents Install Wheel KitTo install Check Battery / Attach Negative Battery WireAdd Fuel Before Starting the EngineAdd Engine Oil Generator Location Using the GeneratorConnecting to a Building’s Electrical System System GroundDo not Overload the GENERATOR. See Don’t Overload Generator Connecting Electrical LoadsOperating the Generator Starting the EngineTo recharge 12 Volt batteries, proceed as follows Charging a BatteryStopping the Engine Operating Automatic Idle ControlCold Weather Operation How to Use the Battery ChargerCreating a Permanent Shelter Creating a Temporary ShelterVolt AC, 20 Amp, Duplex Receptacle Generator Adapter Cord SETReceptacles Volt DC, 10 Amp Receptacle120/240 Volt AC, 50 Amp Receptacle 120/240 Volt AC, 30 Amp, Locking ReceptacleExample Power ManagementDont Overload Generator CapacityGeneral Maintenance Recommendations SpecificationsOther Storage Tips StorageGenerator Storage Engine StorageTroubleshooting Effective November 1 About your equipment warranty

101 9-3 specifications

The Generac 101 9-3 is a cutting-edge power generation solution designed to meet the diverse needs of both residential and commercial users. Renowned for its robust construction and innovative technologies, this unit stands out in the competitive market of backup generators.

At the heart of the Generac 101 9-3 is its powerful engine, capable of delivering reliable performance in any situation. This generator boasts a high-output capacity, ensuring that it can handle multiple appliances simultaneously during outages. It is particularly well-suited for larger homes and businesses that depend on a steady power supply for critical operations.

One of the main features of the Generac 101 9-3 is its automatic transfer switch (ATS). This technology allows the generator to detect power outages and switch on automatically, ensuring minimal disruption. The ATS guarantees that the transition from grid power to generator power is seamless and instantaneous, providing peace of mind for users.

The unit also showcases a user-friendly control panel with intuitive interfaces, making it easy to monitor performance and adjust settings. Generac has integrated advanced monitoring capabilities, allowing users to track fuel levels, power output, and maintenance schedules. This feature enhances the convenience of ownership and prolongs the lifespan of the generator.

Another remarkable characteristic of the Generac 101 9-3 is its emissions control technology. Designed to meet stringent environmental regulations, this generator operates efficiently while minimizing its carbon footprint. The low-emission engine is a testament to Generac’s commitment to sustainable energy solutions.

In terms of durability, the Generac 101 9-3 is built to withstand harsh weather conditions. Housed in a weatherproof enclosure, it is protected from rain, snow, and extreme temperatures, ensuring reliability in any climate. Its heavy-duty construction provides the longevity needed for prolonged use, making it a worthwhile investment.

Additionally, the Generac 101 9-3 is designed with serviceability in mind. It comes equipped with easily accessible components, simplifying maintenance and repair tasks. This thoughtful design feature helps reduce downtime and keeps the generator running at peak performance.

In conclusion, the Generac 101 9-3 is a high-performance generator that combines power, efficiency, and durability. Its automatic transfer switch, advanced monitoring, emissions control technology, and user-friendly design make it an excellent choice for anyone in need of a reliable power backup solution. Whether for home or business use, the Generac 101 9-3 stands ready to deliver dependable energy when it’s needed most.
Top Page Image Contents