Armstrong World Industries ACUM185, ACUM84, ACUM140, ACUM65 Automatic Mode of Operation, Shutdowns

Page 26

Page 26

7.CONTROL PANEL OPERATION

7.1.DESCRIPTION OF OPERATION

7.1 .1 MANUAL MODE OPERATION

To initiate a start sequence in MANUAL, turn the key to the position.

To start the set, press the

button. Preheating will

begin, indicated by the

LED.

NOTE:- There is no Start Delay in this mode of operation. Starting will commence as soon as the start button is pressed.

The Fuel Solenoid is energised, then the Starter Motor is engaged.

The engine is cranked for a 10-second period. If the engine fails to fire during this cranking attempt then the starter motor is disengaged for a 10-second period. Should this sequence continue beyond the 3 starting attempts, the start sequence will be terminated and Fail to Start fault will be illuminated.

When the engine fires, the starter motor is disengaged and locked out at 20 Hz measured from the Alternator output. After the starter motor has disengaged, the Safety On timer is activated (which is fixed at 10 seconds), allowing Oil Pres- sure, High Engine Temperature, Under-speed and Charge Fail to stabilise without triggering the fault.

Selecting

STOP

de-energises the FUEL SOLENOID,

bringing

the

generator to a stop.

7.1..2 AUTOMATIC MODE OF OPERATION

To initiate

a start sequence in AUTO, turn the key to

the posi-

tion.

 

The start sequence is initiated when the remote start input is activated. After a fixed 5 second start delay, Preheating will occur (fixed at 10s) , indicated by the LED.

The Fuel Solenoid is energised, then one second later, the Starter Motor is engaged.

The engine is cranked for a 10-second period. If the engine fails to fire during this cranking attempt then the starter motor is disengaged for a 10-second rest period. Should this sequence continue beyond the 3 starting attempts, the start sequence will be terminated and Fail to Start fault will be illuminated.

When the engine fires, the starter motor is disengaged and locked out at 20 Hz measured from the Alternator output.. After the starter motor has disengaged, the Safety On timer is activated, allowing Oil Pressure, High Engine Tempera- ture, Under-speed and Charge Fail to stabilise without trig- gering the fault. On removal of the Remote Start signal the Stop delay timer is initiated. Once this timer has expired the Fuel Solenoid is de-energised, bringing the generator to a stop.

7.1.3 WARNINGS

Warnings are used to warn the operator of an impending fault BATTERY CHARGE FAILURE, if the module does not detect a voltage from the warning light terminal on the aux- iliary charge alternator, the icon will illuminate.

7.1.4 SHUTDOWNS

Shutdowns are latching and stop the Generator. The alarm must be cleared, and the fault removed to reset the mod- ule. In the event of a shutdown the appropriate LED will be illuminated NOTE:- The alarm condition must be rectified before a reset will take place. If the alarm condition remains it will not be possible to reset the unit (The exception to this is the Low Oil Pressure alarm and similar ‘delayed alarms’, as the oil pressure will be low with the engine at rest).

FAIL TO START, if the engine does not fire after the pre-set 3 attempts at starting, a shutdown will be initiated. The icon will illuminate.

LOW OIL PRESSURE, if the module detects that the engine oil pressure has fallen below the low oil pressure switch after the Safety On timer has expired, a shutdown will oc- cur. The icon will illuminate.

HIGH ENGINE TEMPERATURE if the module detects that the engine coolant temperature has exceeded the high engine temperature switch after the Safety On timer has expired, a shutdown will occur. The icon will illuminate.

OVERSPEED, if the engine speed exceeds the pre-set trip (14% above the nominal frequency) a shutdown is initiated. Overspeed is not delayed, it is an immediate shutdown. The icon will illuminate.

NOTE:- During the start-up sequence the overspeed trip level is extended to 24% above the normal fre- quency for the duration of the safety timer to allow an extra trip level margin. This is used to prevent nuisance tripping on start-up.

UNDERSPEED, if the engine speed falls below 20Hz (fixed)

AR-EXP-CUMMINS-07-00

OWNERS MANUAL

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Cummins Series AR-EXP-CUMMINS-07-00 Warranty Certificate AR-EXP-CUMMINS-07-00 Introduction GeneralINSTALLATION, Handling and Towing Fire and ExplosionMechanical ChemicalNoise ElectricalCall First AID for Electric ShockWhat to do BlowSpecial Considerations for Battery Generating SET Installation Mounting LocationGROUND/FLOOR Loading Ventilation Outdoor Installations AIR Cooled Units General Electrical System Connecting the GeneratorElectrical System General Rules for Exhaust SystemLocation Installation Checklist Battery InstallationFuel System Electrical ConnectionsAR-EXP-CUMMINS-07-00 Generating SET Operation Maintenance Generator Tests Under Load PRE-OPERATION CheckElectrical Checks ShockGenerator Checking Automatic OperationInstallation and Application ACUM84 ACUM110 ACUM140 ACUM185 ACUM210 Automatic Mode of Operation ShutdownsSettings Fixed Settings Terminal DescriptionEngine Checks During Operation Maintenance ScheduleInstruments Reading Radiator Cooling water CoolantEvery 500 Hours or 6 Months Maintenance Daily or Refueling Maintenance Check4Every 250 Hours or 3 Months Maintenance Check 1 Every 2000 Hours or 2 Years Maintenance CheckCUMMINS/FLEETGUARD Filter Specifications API CG-4/SH, API CD, API Acea E-1Not OK OBSOLETE. do not Maintennce of Bearings AlternatorInspection and Maintenace Intervals Voltag Regulator USE of Potentiometers

ACUM210, ACUM110, ACUM65, ACUM185, ACUM140 specifications

Armstrong World Industries has established itself as a leader in the design and manufacture of innovative ceiling and wall solutions. Among their notable acoustic ceiling offerings are the ACUM84, ACUM210, ACUM65, ACUM140, and ACUM185 tiles. Each of these products is engineered with distinct features and technologies aimed at enhancing acoustic performance, durability, and aesthetics in various commercial spaces.

The ACUM84 is designed for spaces that prioritize sound absorption and overall acoustic quality. It utilizes advanced sound-dampening technology, making it suitable for environments such as offices, schools, and healthcare facilities. This tile achieves a high Noise Reduction Coefficient (NRC), effectively minimizing sound reverberation, which is essential for maintaining concentration in busy settings.

Similarly, the ACUM210 offers enhanced acoustic properties but with a focus on durability. This tile is constructed with a robust material that is resistant to impact and moisture, making it an excellent choice for high-traffic areas. The fabric-like texture not only adds aesthetic value but also improves its sound-absorbing capabilities, contributing to a quieter environment.

For those seeking a versatile solution, the ACUM65 is an ideal option. This tile is lightweight yet durable, making installation straightforward. Its ecological design ensures minimal environmental impact while providing superior acoustic performance. The ACUM65 is particularly well-suited for retail spaces, where customer experience can be significantly enhanced by better sound control.

ACUM140 is engineered for flexibility and design versatility. With a range of finishes and colors, it allows architects and designers to incorporate acoustic solutions that harmonize with the overall aesthetic of the space. Its high NRC rating ensures a calm auditory environment, making it an excellent fit for restaurants and auditoriums.

Lastly, the ACUM185 combines aesthetics with functionality, offering a sleek design while maintaining outstanding sound absorption capabilities. It meets the demands of contemporary styling without compromising performance. This tile is particularly favored in corporate environments where aesthetics play a crucial role in branding and employee satisfaction.

In conclusion, Armstrong's ACUM product line, including ACUM84, ACUM210, ACUM65, ACUM140, and ACUM185, showcases technologies and characteristics that cater to a variety of applications. With a strong focus on acoustic management, durability, and design versatility, Armstrong continues to provide innovative solutions tailored to the needs of modern commercial spaces.
Top Page Image Contents